[Coco] CoCo3 FPGA project analog boards

[Ronivon Costa]

it is getting closer!!

By the way, Ed... when do yo think you will start shipping?
I am travelling quit a lot and would like to know if I should take my DE1
along with me!
:)

Roni
http://Retro-CPU.run

On 3 June 2016 at 11:56, Marcelo Cannella <marcelo.cannella at gmail.com>
wrote:

> Ed. Thank you for all this work!
> I will want...
>
> 2016-06-03 11:35 GMT-03:00 Mathieu Chouinard <chouimat at gmail.com>:
>
> > yay ;)
> >
> > On Fri, Jun 3, 2016 at 10:19 AM, Zippster <zippster278 at gmail.com> wrote:
> > > The PCBs for the run of CoCo3 FPGA analog boards has arrived,
> > > and they’re looking pretty good.
> > >
> > > I can finally get to assembly on these….  :)
> > >
> > > <https://drive.google.com/open?id=0B1sgl615FlGnbExqckhjNTNIMG8 <
> > https://drive.google.com/open?id=0B1sgl615FlGnbExqckhjNTNIMG8>>
> > >
> > > - Ed
> > >
> > >
> > >> On May 28, 2016, at 2:29 PM, Zippster <zippster278 at gmail.com> wrote:
> > >>
> > >> Another update…
> > >>
> > >> I’ve been able to test the joystick circuits, the additional serial
> > port, and now thanks to
> > >> Dave Philipsen, the SRAM.  Thank you Dave, that really helps put my
> > mind at ease.
> > >>
> > >> It all looks good and we are a go, so the board order has been placed.
> > >>
> > >> All the other components have been received or are on their way except
> > the SRAMs
> > >> and the AD chips, which I’ll get ordered this weekend.
> > >>
> > >> The new top plates are in from Tim Linder.  Thank you for your help on
> > this Tim, very appreciated.  :)
> > >>
> > >> I should be building these starting in about one week.
> > >>
> > >> <https://drive.google.com/open?id=0B1sgl615FlGnWnQwRlJQOG1oYXc <
> > https://drive.google.com/open?id=0B1sgl615FlGnWnQwRlJQOG1oYXc>>
> > >>
> > >> - Ed
> > >>
> > >>
> > >>> On May 16, 2016, at 9:59 PM, Zippster <zippster278 at gmail.com
> <mailto:
> > zippster278 at gmail.com>> wrote:
> > >>>
> > >>> Hi guys,
> > >>>
> > >>> A little update.
> > >>>
> > >>> I built one of the test boards tonight, so I should be able to get
> > this tested over the next day
> > >>> or two, get a few small tweaks (positioning of the WiFi module
> > mostly), and then get the
> > >>> run ordered.  They are taking about 1 week to get to me right now, so
> > I should be able to start
> > >>> shipping boards in about 2 weeks or so assuming everything goes ok.
> > >>>
> > >>> Tim Linder has offered to help me with getting some new top plates
> cut
> > for our CoCo3 FPGAs.
> > >>>
> > >>> Here's a pic of the sample top plate.  This should help tie
> everything
> > into a finished looking package.
> > >>> New top plates along with a standoff kit will be included with the
> > boards.
> > >>>
> > >>> Pics…
> > >>> <https://drive.google.com/open?id=0B1sgl615FlGnX01MOEFSMnpXME0 <
> > https://drive.google.com/open?id=0B1sgl615FlGnX01MOEFSMnpXME0>>
> > >>> <https://drive.google.com/open?id=0B1sgl615FlGnWVhBbFpEOGIwOFE <
> > https://drive.google.com/open?id=0B1sgl615FlGnWVhBbFpEOGIwOFE>>
> > >>>
> > >>> Sorry this is taking so long, but hopefully the results will be worth
> > it.   :)
> > >>>
> > >>> - Ed
> > >>>
> > >
> > >
> > > --
> > > Coco mailing list
> > > Coco at maltedmedia.com
> > > https://pairlist5.pair.net/mailman/listinfo/coco
> >
> >
> >
> > --
> > A te quaeso, sicut in Aeneidos libro quarto Aeneas, elocutus
> > desiderium erigendi suum obeliscum in templo Venereo Didonis, ab ea
> > quaesivit, tuae domi an meae?
> >
> > --
> > Coco mailing list
> > Coco at maltedmedia.com
> > https://pairlist5.pair.net/mailman/listinfo/coco
> >
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>