[Coco] CoCo3 FPGA project analog boards

[Marcelo Cannella]

Ed. Thank you for all this work!
I will want...

2016-06-03 11:35 GMT-03:00 Mathieu Chouinard <chouimat at gmail.com>:

> yay ;)
>
> On Fri, Jun 3, 2016 at 10:19 AM, Zippster <zippster278 at gmail.com> wrote:
> > The PCBs for the run of CoCo3 FPGA analog boards has arrived,
> > and they’re looking pretty good.
> >
> > I can finally get to assembly on these….  :)
> >
> > <https://drive.google.com/open?id=0B1sgl615FlGnbExqckhjNTNIMG8 <
> https://drive.google.com/open?id=0B1sgl615FlGnbExqckhjNTNIMG8>>
> >
> > - Ed
> >
> >
> >> On May 28, 2016, at 2:29 PM, Zippster <zippster278 at gmail.com> wrote:
> >>
> >> Another update…
> >>
> >> I’ve been able to test the joystick circuits, the additional serial
> port, and now thanks to
> >> Dave Philipsen, the SRAM.  Thank you Dave, that really helps put my
> mind at ease.
> >>
> >> It all looks good and we are a go, so the board order has been placed.
> >>
> >> All the other components have been received or are on their way except
> the SRAMs
> >> and the AD chips, which I’ll get ordered this weekend.
> >>
> >> The new top plates are in from Tim Linder.  Thank you for your help on
> this Tim, very appreciated.  :)
> >>
> >> I should be building these starting in about one week.
> >>
> >> <https://drive.google.com/open?id=0B1sgl615FlGnWnQwRlJQOG1oYXc <
> https://drive.google.com/open?id=0B1sgl615FlGnWnQwRlJQOG1oYXc>>
> >>
> >> - Ed
> >>
> >>
> >>> On May 16, 2016, at 9:59 PM, Zippster <zippster278 at gmail.com <mailto:
> zippster278 at gmail.com>> wrote:
> >>>
> >>> Hi guys,
> >>>
> >>> A little update.
> >>>
> >>> I built one of the test boards tonight, so I should be able to get
> this tested over the next day
> >>> or two, get a few small tweaks (positioning of the WiFi module
> mostly), and then get the
> >>> run ordered.  They are taking about 1 week to get to me right now, so
> I should be able to start
> >>> shipping boards in about 2 weeks or so assuming everything goes ok.
> >>>
> >>> Tim Linder has offered to help me with getting some new top plates cut
> for our CoCo3 FPGAs.
> >>>
> >>> Here's a pic of the sample top plate.  This should help tie everything
> into a finished looking package.
> >>> New top plates along with a standoff kit will be included with the
> boards.
> >>>
> >>> Pics…
> >>> <https://drive.google.com/open?id=0B1sgl615FlGnX01MOEFSMnpXME0 <
> https://drive.google.com/open?id=0B1sgl615FlGnX01MOEFSMnpXME0>>
> >>> <https://drive.google.com/open?id=0B1sgl615FlGnWVhBbFpEOGIwOFE <
> https://drive.google.com/open?id=0B1sgl615FlGnWVhBbFpEOGIwOFE>>
> >>>
> >>> Sorry this is taking so long, but hopefully the results will be worth
> it.   :)
> >>>
> >>> - Ed
> >>>
> >
> >
> > --
> > Coco mailing list
> > Coco at maltedmedia.com
> > https://pairlist5.pair.net/mailman/listinfo/coco
>
>
>
> --
> A te quaeso, sicut in Aeneidos libro quarto Aeneas, elocutus
> desiderium erigendi suum obeliscum in templo Venereo Didonis, ab ea
> quaesivit, tuae domi an meae?
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>