[Coco] DE-0 Nano Successfully Programmed!

[Kip Koon]

Hi Steve,
Absolutely!  I programmed mine without the RGB2VGA board attached.  With the short 1" cables I was using, as soon as I plugged in the monitor cable to the VGAOUT connector, the power light on the DE-0 Nano turned off!  Ouch!!!  Fortunately, no damage was done and I eventually programmed the rgb2vga.jic file using the jtag option into my DE-0 Nano just fine.  I found out from John Mark that all the pins were switched - 1 to 2 and 2 to 1 onward to 39 & 40 instead of being 1 to 1 and so on.  

Kip Koon
computerdoc at sc.rr.com
http://www.cocopedia.com/wiki/index.php/Kip_Koon



> -----Original Message-----
> From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Steve Batson
> Sent: Thursday, June 04, 2015 9:37 AM
> To: CoCoList for Color Computer Enthusiasts
> Subject: Re: [Coco] DE-0 Nano Successfully Programmed!
> 
> I'm assuming the board can be programmed without the RGB2VGA card attached...My DE-0 Nano should be her Friday. My plan is to
> program the board with Luis's code and have it ready to go when Kip's card arrives so I can test right away. Once tested and working,
> my next task will be to find an enclosure to put it in.
> 
> 
> On Jun 4, 2015, at 5:29 AM, Steve Batson <steve at batsonphotography.com> wrote:
> 
> > And that's what is expect if all is done right.
> >
> > Kip, I'd rather see your known working procedure than a translated procedure that had errors.
> >
> > Steve Batson
> > Batson Photography
> > "Today's Special Moments, Tomorrow's Priceless Treasures"
> >
> > Website: http://www.batsonphotography.com
> > Blog: http://www.batsonphotography.com/blog
> > Our Free Photography Site and Forum: http://www.digitalphotographerzone.com
> >
> >> On Jun 4, 2015, at 4:39 AM, Steven Hirsch <snhirsch at gmail.com> wrote:
> >>
> >>> On Wed, 3 Jun 2015, Steve Batson wrote:
> >>>
> >>> This should be helpful. A little worrisome that there are so many errors that occur. If you have an additional tips from your
> experience, would be nice to see them too.
> >>
> >> FWIW, I have yet to see any sort of error during either compilation or programming.
> >>
> >> --
> >>
> >> --
> >> Coco mailing list
> >> Coco at maltedmedia.com
> >> https://pairlist5.pair.net/mailman/listinfo/coco
> >
> >
> > --
> > Coco mailing list
> > Coco at maltedmedia.com
> > https://pairlist5.pair.net/mailman/listinfo/coco
> 
> 
> 
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco