[Coco] VCC 1.43beta question

[Mathieu Chouinard]

Hi,
Any plan for a mess (windows and/or linux) version of the starter kit ?
Mathieu
On Nov 5, 2014 4:55 PM, "Bill Pierce via Coco" <coco at maltedmedia.com> wrote:

>
> Tony,
> In Vcc 1.4.3b, you use the fd-502.dll in slot 4, then in the "FD-502
> Config" use "external rom" and use "hdbdw4cc3.rom". You do not use RGBDOS
> as it is not drivewire compatible. If you do not plan to use dw4, then I
> would just use Vcc 1.4.2 with rgbdos. 1.4.3b was only modded for the Becker
> port and is no different than 1.4.2 with the exception of the port.
> And as far as I know, the rgbdos in the installation and the one on
> Robert's site are the same.
> You can also try the Vcc starter kits on my site which are set up and
> ready to run. All you have to do is mount the VHDs and there's instructions
> to do that.
>
> https://sites.google.com/site/dabarnstudio/the-color-computer-drivewire4-hdbdos-nitros9-starter-kit
>
>
>
> Bill Pierce
> "Today is a good day... I woke up" - Ritchie Havens
>
>
> My Music from the Tandy/Radio Shack Color Computer 2 & 3
> https://sites.google.com/site/dabarnstudio/
> Co-Webmaster of The TRS-80 Color Computer Archive
> http://www.colorcomputerarchive.com/
> Co-Contributor, Co-Editor for CocoPedia
> http://www.cocopedia.com/wiki/index.php/Main_Page
> E-Mail: ooogalapasooo at aol.com
>
>
>
>
> -----Original Message-----
> From: tonym <tonym at compusource.net>
> To: coco <coco at maltedmedia.com>
> Sent: Wed, Nov 5, 2014 12:32 pm
> Subject: [Coco] VCC 1.43beta question
>
>
> Were the RGBDOS changes in the update.zip file from Robert Gault's website
> incorporated into the FD502.DLL in the Vcc 1.43beta package?
> Or do we still need to use the FD502.DLL from Robert's update.zip file
> with Vcc
> 1.43beta?
>
> Tks!
>
> Tony
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>