[Coco] VCC 1.43beta question

[tonym]

Strange. There's an Update.Zip on Robert Gault's site:

http://aaronwolfe.com/robert.gault/Coco/Downloads/Updates.zip


That says in the readme.txt:

"Here are updated RGBDOS ROMs for emulators.

A problem with incorrect treatment of disk I/O errors has been corrected for JVC, MESS, and VCC.

New feature for the JVC Coco3 emulator with two .vhd drives and recent versions of MESS that support two .vhd drives.
DRIVE#0 selects the first .vhd drive.
DRIVE#1 selects the second .vhd drive.
When using emulation that supports only one .vhd drive, just don't use the DRIVE# command.

INSTALLATION
Pick the appropriate file and rename it as required for your emulator.
JVC - rename disk11.JVC to disk11.rom
MESS - with versions that do not complain about bad ROMs, rename disk11.MESS to disk11.rom
     - with versions that do complain, use RGBDOS.ROM along with the stock disk11.rom. Mount the RGBDOS.ROM in the
       cartridge slot.
VCC - replace your current fd502.dll with the enclosed."



This is separate from the standard RGBDOS.zip file he has for download in the same place.

Tony


---- Original Message ----
From: "Bill Pierce via Coco" <coco at maltedmedia.com>
Sent: 11/5/2014 4:55:02 PM
To: coco at maltedmedia.com
Subject: Re: [Coco] VCC 1.43beta question


Tony,
In Vcc 1.4.3b, you use the fd-502.dll in slot 4, then in the "FD-502 Config" use "external rom" and use "hdbdw4cc3.rom". You do not use RGBDOS as it is not drivewire compatible. If you do not plan to use dw4, then I would just use Vcc 1.4.2 with rgbdos. 1.4.3b was only modded for the Becker port and is no different than 1.4.2 with the exception of the port.
And as far as I know, the rgbdos in the installation and the one on Robert's site are the same.
You can also try the Vcc starter kits on my site which are set up and ready to run. All you have to do is mount the VHDs and there's instructions to do that.
https://sites.google.com/site/dabarnstudio/the-color-computer-drivewire4-hdbdos-nitros9-starter-kit

 

Bill Pierce
"Today is a good day... I woke up" - Ritchie Havens
 

My Music from the Tandy/Radio Shack Color Computer 2 & 3
https://sites.google.com/site/dabarnstudio/
Co-Webmaster of The TRS-80 Color Computer Archive
http://www.colorcomputerarchive.com/
Co-Contributor, Co-Editor for CocoPedia
http://www.cocopedia.com/wiki/index.php/Main_Page
E-Mail: ooogalapasooo at aol.com


 
 
-----Original Message-----
From: tonym <tonym at compusource.net>
To: coco <coco at maltedmedia.com>
Sent: Wed, Nov 5, 2014 12:32 pm
Subject: [Coco] VCC 1.43beta question


Were the RGBDOS changes in the update.zip file from Robert Gault's website 
incorporated into the FD502.DLL in the Vcc 1.43beta package?
Or do we still need to use the FD502.DLL from Robert's update.zip file with Vcc 
1.43beta?

Tks!

Tony

-- 
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco

 

-- 
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco