[Coco] VCC 1.43beta question

[Bill Pierce]

Tony,
In Vcc 1.4.3b, you use the fd-502.dll in slot 4, then in the "FD-502 Config" use "external rom" and use "hdbdw4cc3.rom". You do not use RGBDOS as it is not drivewire compatible. If you do not plan to use dw4, then I would just use Vcc 1.4.2 with rgbdos. 1.4.3b was only modded for the Becker port and is no different than 1.4.2 with the exception of the port.
And as far as I know, the rgbdos in the installation and the one on Robert's site are the same.
You can also try the Vcc starter kits on my site which are set up and ready to run. All you have to do is mount the VHDs and there's instructions to do that.
https://sites.google.com/site/dabarnstudio/the-color-computer-drivewire4-hdbdos-nitros9-starter-kit

 

Bill Pierce
"Today is a good day... I woke up" - Ritchie Havens
 

My Music from the Tandy/Radio Shack Color Computer 2 & 3
https://sites.google.com/site/dabarnstudio/
Co-Webmaster of The TRS-80 Color Computer Archive
http://www.colorcomputerarchive.com/
Co-Contributor, Co-Editor for CocoPedia
http://www.cocopedia.com/wiki/index.php/Main_Page
E-Mail: ooogalapasooo at aol.com


 
 
-----Original Message-----
From: tonym <tonym at compusource.net>
To: coco <coco at maltedmedia.com>
Sent: Wed, Nov 5, 2014 12:32 pm
Subject: [Coco] VCC 1.43beta question


Were the RGBDOS changes in the update.zip file from Robert Gault's website 
incorporated into the FD502.DLL in the Vcc 1.43beta package?
Or do we still need to use the FD502.DLL from Robert's update.zip file with Vcc 
1.43beta?

Tks!

Tony

-- 
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco