[Coco] This did not work adding t2

plt plt1914 at sky-chat.net
Mon Mar 3 18:52:35 EST 2025


Hello

I typed kwikgen #30k and after typing l os9boot I am getting a error that
he memory is to small to load the bootfile.



On Mon, March 3, 2025 22:57, David Ladd via Coco wrote:
> On Mon, Mar 3, 2025 at 4:27 PM plt via Coco <coco at maltedmedia.com>
> wrote:
>
>
>>
>> I need /t2 and should have never been removed from Nitros9. There has
>> to be a way to work around the issue?
>>
>
> If you are trying to use the actual /t2 and the 6551 driver in NitrOS-9
> it is in the drivers folder. Most people do not have RS-232 Pak's and to
> save on RAM only common modules are installed by default. For specific
> modules I found it easier to add them with KWIKGEN.
>
> As far as using the actual 6551 driver and /t2 descriptor to talk to
> DriveWire you are going to have to write a brand new driver to work
> through /t2 for that and also with IRQ's on your going to be limited to
> about 1200 to 2400 baud.
>
> That is why there is a dedicated DWIO driver written specifically to talk
>  to the 6551 directly with IRQ's turned off to get the 115200 baud speed.
>
>
> Though it will be interesting to see what you can do though.
>
>
>
>
>>
>> <cut>
>>
>
>
>
>
>
> Sincerely,
> David Ladd
> ***END OF LINE***
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>
>




More information about the Coco mailing list