[Coco] Now running with 2M boomerang Memory.

[Roy Justus]

I  purchased mine about 2 decades ago and they are still strong

 
-----Original Message-----
From: Gene Heskett <gheskett at shentel.net>
To: coco at maltedmedia.co
Sent: Sat, Jun 27, 2020 2:13 am
Subject: Re: [Coco] Now running with 2M boomerang Mem+ory.

On Friday 26 June 2020 23:15:36 Roy Justus via Coco wrote:

>  Get a Xytronix iron from Jameco

I hope yours lasts more than the 6 months I got out of one. Something 
went south in the temp regulation and the outfit in Nebraska I bought it 
from refused to do anything about it.

>  they  have tips that last a lifetime.
> also I use dissection microscope.   Mine set me back about $ 600
>
> -----Original Message-----
> From: John E. Malmberg <wb8tyw at qsl.net>
> To: coco at maltedmedia.com
> Sent: Sat, Jun 6, 2020 7:36 pm
> Subject: [Coco] Now running with 2M boomerang Memory.
> * I need a better soldering iron.  The 30+ year old 15W one from Radio
> Shack is on it's last tip that I have for it.  It is barely good
> enough to do this type of work.
>
> Need to figure out what to get and where to get it, and how much it is
> going to cost.
>
> So looking for recommendations.  This is for hobby use.
>
> * My two solder sucking systems did not have enough suction to save
> destroying the 68b09E chip.  One is just a suction bulb on on a hollow
> tip version of the 15 watt version, that probably came from Radio
> Shack way back when.  The other is the spring loaded suction from
> Radio Shack.
>
> Still have the chip if I can manage to solder pins back on it.  :-)
>
> I seem to remember that the spring loaded one used to have enough
> suction to clear the pins of things I was desoldering.
>
> I was only able to clear the solder on about 50% of the pins with the
> two soldering suckers.
>
> Not sure where I got the one with the suction bulb.  I do not remember
> buying it, and this may have been the first time I used it.
>
> Not sure if I could afford anything better, but it would be
> interesting to know the options.
>
> * Third problem is the the variable transition bi-focals.  It is hard
> to find a position that I can really see what I am doing.  I may need
> to get a pair of glasses just for doing this type of work, or some
> type of magnifying glass.
>
> Regards,
> -John
>
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco


Cheers, Gene Heskett
-- 
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
If we desire respect for the law, we must first make the law respectable.
 - Louis D. Brandeis
Genes Web page <http://geneslinuxbox.net:6309/gene>

-- 
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco