[Coco] DS1216

[Bill Pierce]

 Send me a copy of the file and I'll disassemble it.. 
I'll also check the CRC against the one on TSI

 


Bill Pierce
"Charlie stole the handle, and the train it won't stop going, no way to slow down!" - Ian Anderson - Jethro Tull

 

My Music from the Tandy/Radio Shack Color Computer 2 & 3
https://sites.google.com/site/dabarnstudio/
Co-Contributor, Co-Editor for CocoPedia
http://www.cocopedia.com/wiki/index.php/Main_Page
Global Moderator for TRS-80/Tandy Color Computer Forums
http://www.tandycoco.com/forum/

E-Mail: ooogalapasooo at aol.com


 

 

-----Original Message-----
From: K. Pruitt <pruittk at roadrunner.com>
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
Sent: Wed, Sep 23, 2015 12:55 pm
Subject: Re: [Coco] DS1216


Thanks Bill.  I'll give that a shot.

I'd really like to get this modified for
George to solve his issue with 
setclk.

"But what you described sounded like
6809 being disassembled by 6309 disasm 
from the wrong entry point."

Yep. that
pretty much describes what I am seeing. Because not only am I 
seeing what I now
understand to be 6309 code, but the internal addressing is 
off as well.

Thanks
again.


----- Original Message ----- 
From: "Bill Pierce via Coco"
<coco at maltedmedia.com>
To: <coco at maltedmedia.com>
Cc: "Bill Pierce"
<ooogalapasooo at aol.com>
Sent: Wednesday, September 23, 2015 6:24 AM
Subject: Re:
[Coco] DS1216


> Kelly, if you're using the disassembler from the repo disks,
it's a 6309 
> compatible disasm... hence the odd instructions.
> Now why is it
throwing 6309 code up when it's a 6809 program? It's hitting 
> the FCBs & FDBs
at the beginning and seeing them as code... some are 
> reading as 6309 stuff.
That's why you have no data at the beginning.
>
> Try using Sleuth... it will
give you the "Entry" address when it reads the 
> file in, you can then set the
FCB/FDB/FCC/FCS areas, and do fake disasms 
> until you get all set... then save
it to disk. I think you'll get a better 
> disassembly with Sleuth... unless it
IS actually 6309 code..... But what 
> you described sounded like 6809 being
disassembled by 6309 disasm from the 
> wrong entry point.
>
> Also, I think the
sources are on RTSI...
> Try this and see if it's the same program:
>
http://ftp://os9archive.rtsi.com/OS9/OS9_6X09/SYSMODS/RTC_Disto_RGB_Utils.lzh
>
>
>
>
>
>
>
Bill Pierce
> "Charlie stole the handle, and the train it won't stop going, no
way to 
> slow down!" - Ian Anderson - Jethro Tull
>
>
>
> My Music from the
Tandy/Radio Shack Color Computer 2 & 3
>
https://sites.google.com/site/dabarnstudio/
> Co-Contributor, Co-Editor for
CocoPedia
> http://www.cocopedia.com/wiki/index.php/Main_Page
> Global Moderator
for TRS-80/Tandy Color Computer Forums
> http://www.tandycoco.com/forum/
>
>
E-Mail: ooogalapasooo at aol.com
>


-- 
Coco mailing
list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco