[Coco] DS1216

[K. Pruitt]

P.S. The link you provided is the source code for setclk. Shouldn't be a 
problem modifying setclk to do what George wants it to do now.
This is awesome. Thanks.


----- Original Message ----- 
From: "K. Pruitt" <pruittk at roadrunner.com>
To: "CoCoList for Color Computer Enthusiasts" <coco at maltedmedia.com>
Sent: Wednesday, September 23, 2015 9:54 AM
Subject: Re: [Coco] DS1216


> Thanks Bill.  I'll give that a shot.
>
> I'd really like to get this modified for George to solve his issue with 
> setclk.
>
> "But what you described sounded like 6809 being disassembled by 6309 
> disasm from the wrong entry point."
>
> Yep. that pretty much describes what I am seeing. Because not only am I 
> seeing what I now understand to be 6309 code, but the internal addressing 
> is off as well.
>
> Thanks again.
>
>
> ----- Original Message ----- 
> From: "Bill Pierce via Coco" <coco at maltedmedia.com>
> To: <coco at maltedmedia.com>
> Cc: "Bill Pierce" <ooogalapasooo at aol.com>
> Sent: Wednesday, September 23, 2015 6:24 AM
> Subject: Re: [Coco] DS1216
>
>
>> Kelly, if you're using the disassembler from the repo disks, it's a 6309 
>> compatible disasm... hence the odd instructions.
>> Now why is it throwing 6309 code up when it's a 6809 program? It's 
>> hitting the FCBs & FDBs at the beginning and seeing them as code... some 
>> are reading as 6309 stuff. That's why you have no data at the beginning.
>>
>> Try using Sleuth... it will give you the "Entry" address when it reads 
>> the file in, you can then set the FCB/FDB/FCC/FCS areas, and do fake 
>> disasms until you get all set... then save it to disk. I think you'll get 
>> a better disassembly with Sleuth... unless it IS actually 6309 code..... 
>> But what you described sounded like 6809 being disassembled by 6309 
>> disasm from the wrong entry point.
>>
>> Also, I think the sources are on RTSI...
>> Try this and see if it's the same program:
>> http://ftp://os9archive.rtsi.com/OS9/OS9_6X09/SYSMODS/RTC_Disto_RGB_Utils.lzh
>>
>>
>>
>>
>>
>>
>> Bill Pierce
>> "Charlie stole the handle, and the train it won't stop going, no way to 
>> slow down!" - Ian Anderson - Jethro Tull
>>
>>
>>
>> My Music from the Tandy/Radio Shack Color Computer 2 & 3
>> https://sites.google.com/site/dabarnstudio/
>> Co-Contributor, Co-Editor for CocoPedia
>> http://www.cocopedia.com/wiki/index.php/Main_Page
>> Global Moderator for TRS-80/Tandy Color Computer Forums
>> http://www.tandycoco.com/forum/
>>
>> E-Mail: ooogalapasooo at aol.com
>>
>
>
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>