[Coco] 4 Port MPI PCB artwork (so far)

[Kip Koon]

Hi Jim,
I am at a work stoppage point so I decided to try to catch up on some reading.  I've started reading this thread backwards so I'm just learning what is going on.  I just saw your take on the 8 slot MPI which is interesting.  I don't know if you are interested, but I have Tim Gunnison's MPI entered into eagle, I just don't have the PCB layout done yet.  Would you like to see it?

Kip Koon
computerdoc at sc.rr.com
http://www.cocopedia.com/wiki/index.php/Kip_Koon



-----Original Message-----
From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of RETRO Innovations
Sent: Monday, March 02, 2015 5:06 AM
To: CoCoList for Color Computer Enthusiasts
Subject: Re: [Coco] 4 Port MPI PCB artwork (so far)

On 3/2/2015 3:31 AM, Joe Grubbs wrote:
> Great work Jim.
>
> I sort of became a bit lost in the MPI debacle, but is this a design you intend to produce and sell?
I'll put something in the store, but not sure if it'll be this 4 porter or an 8 porter.  The 8 porter is just this unit... stretched, basically, so I figure I'll get his one done (correct size PCB, the cabling to detach, etc.), and then run a small batch of boards and hand solder a few for folks to test.

I am trying to see if there might be a way to put 1 conn at the end horizontal, 2 underneath, horizontal, and one off the side, to get 8 ports without the bulk/length.  Not sure, but figured can't hurt to try.

Jim


--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco