[Coco] Current Status of the "Help Send A Fellow CoCoNut To This Year's CoCoFEST" Campaign

[Kip Koon]

Hi Bill,
I just looked at the write up on your web page and my 1084S has a round TTL RGB input also, so I will just need the cable that mates to the Coco 3.  I'll have to get the round TTL RGB cable from ebay.  Hopefully there is one available.  I was able to get an analog RGB cable since my monitor also has the analog RGB input, but I figured after getting it that I needed to use the TTL RGB input for which I don't have a cable yet.  Your write up confirmed my thoughts, however, should I try the analog RGB cable anyway?  If you hear of a TTL RGB cable with the round connector, would you please let me know.  Thanks a bunch for all the information on your cabling experience with the 1084S monitors in your possession.  I do appreciate it.

Kip Koon
computerdoc at sc.rr.com
http://www.cocopedia.com/wiki/index.php/Kip_Koon



-----Original Message-----
From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Bill Loguidice
Sent: Sunday, February 15, 2015 5:16 PM
To: CoCoList for Color Computer Enthusiasts
Subject: Re: [Coco] Current Status of the "Help Send A Fellow CoCoNut To This Year's CoCoFEST" Campaign

I provide further details of how it hooked up to the 1084S in this old blog
post: http://www.armchairarcade.com/neo/node/5699

-Bill

===================================================
Bill Loguidice, Managing Director; Armchair Arcade, Inc.
<http://www.armchairarcade.com>
===================================================
Authored Books
<http://www.amazon.com/Bill-Loguidice/e/B001U7W3YS/ref=ntt_dp_epwbk_1> and Film <http://www.armchairarcade.com/film>; About me and other ways to get in touch <http://about.me/billloguidice> ===================================================

On Sun, Feb 15, 2015 at 5:10 PM, Kip Koon <computerdoc at sc.rr.com> wrote:

> Hi Bill,
> I've seen those cable ads from Cloud-9, but I still don't know which 
> one to ask for.  If I just say the one for the Commodore 1084S Color 
> Monitor, that will be enough?
>
> Kip Koon
> computerdoc at sc.rr.com
> http://www.cocopedia.com/wiki/index.php/Kip_Koon
>
>
>
> -----Original Message-----
> From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Bill 
> Loguidice
> Sent: Sunday, February 15, 2015 9:32 AM
> To: CoCoList for Color Computer Enthusiasts
> Subject: Re: [Coco] Current Status of the "Help Send A Fellow CoCoNut 
> To This Year's CoCoFEST" Campaign
>
> I got the cable from Cloud-9 (that's as technical as I got). I did 
> need to change the gender for one of my 1084S's, though (easy enough 
> with a cheap adapter), and for one of the other ones I had to use the 
> C-128 to 1084S cable (square to round connector) to make it fit. 
> Otherwise, it worked perfectly and is preferred to using the CM-8 
> because both composite and RGB can be connected at the same time.
>
> -Bill
>
> ===================================================
> Bill Loguidice, Managing Director; Armchair Arcade, Inc.
> <http://www.armchairarcade.com>
> ===================================================
> Authored Books
> <http://www.amazon.com/Bill-Loguidice/e/B001U7W3YS/ref=ntt_dp_epwbk_1>
> and Film <http://www.armchairarcade.com/film>; About me and other ways 
> to get in touch <http://about.me/billloguidice> 
> ===================================================
>
> On Sat, Feb 14, 2015 at 10:06 PM, Kip Koon <computerdoc at sc.rr.com> wrote:
>
> > Hi Bill,
> > Do you have a wiring diagram I can have a copy of so I can make a 
> > CoCo
> > 3 RGB 10-pin output to the 1084S RGB input?  Heck, the pin out for 
> > all the inputs - other than the RCA jacks of course.  Those are a 
> > no-brainer.  :P
> >
> > Kip Koon
> > computerdoc at sc.rr.com
> > http://www.cocopedia.com/wiki/index.php/Kip_Koon
> >
> >
>

--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco