[Coco] Current Status of the "Help Send A Fellow CoCoNut To This Year's CoCoFEST" Campaign

[Bill Loguidice]

I provide further details of how it hooked up to the 1084S in this old blog
post: http://www.armchairarcade.com/neo/node/5699

-Bill

===================================================
Bill Loguidice, Managing Director; Armchair Arcade, Inc.
<http://www.armchairarcade.com>
===================================================
Authored Books
<http://www.amazon.com/Bill-Loguidice/e/B001U7W3YS/ref=ntt_dp_epwbk_1> and
Film <http://www.armchairarcade.com/film>; About me and other ways to get
in touch <http://about.me/billloguidice>
===================================================

On Sun, Feb 15, 2015 at 5:10 PM, Kip Koon <computerdoc at sc.rr.com> wrote:

> Hi Bill,
> I've seen those cable ads from Cloud-9, but I still don't know which one
> to ask for.  If I just say the one for the Commodore 1084S Color Monitor,
> that will be enough?
>
> Kip Koon
> computerdoc at sc.rr.com
> http://www.cocopedia.com/wiki/index.php/Kip_Koon
>
>
>
> -----Original Message-----
> From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Bill
> Loguidice
> Sent: Sunday, February 15, 2015 9:32 AM
> To: CoCoList for Color Computer Enthusiasts
> Subject: Re: [Coco] Current Status of the "Help Send A Fellow CoCoNut To
> This Year's CoCoFEST" Campaign
>
> I got the cable from Cloud-9 (that's as technical as I got). I did need to
> change the gender for one of my 1084S's, though (easy enough with a cheap
> adapter), and for one of the other ones I had to use the C-128 to 1084S
> cable (square to round connector) to make it fit. Otherwise, it worked
> perfectly and is preferred to using the CM-8 because both composite and RGB
> can be connected at the same time.
>
> -Bill
>
> ===================================================
> Bill Loguidice, Managing Director; Armchair Arcade, Inc.
> <http://www.armchairarcade.com>
> ===================================================
> Authored Books
> <http://www.amazon.com/Bill-Loguidice/e/B001U7W3YS/ref=ntt_dp_epwbk_1>
> and Film <http://www.armchairarcade.com/film>; About me and other ways to
> get in touch <http://about.me/billloguidice>
> ===================================================
>
> On Sat, Feb 14, 2015 at 10:06 PM, Kip Koon <computerdoc at sc.rr.com> wrote:
>
> > Hi Bill,
> > Do you have a wiring diagram I can have a copy of so I can make a CoCo
> > 3 RGB 10-pin output to the 1084S RGB input?  Heck, the pin out for all
> > the inputs - other than the RCA jacks of course.  Those are a
> > no-brainer.  :P
> >
> > Kip Koon
> > computerdoc at sc.rr.com
> > http://www.cocopedia.com/wiki/index.php/Kip_Koon
> >
> >
>