[Coco] Getting into Tandy Color Computer 3, Suggestions and Info Needed

[Salvador Garcia]

*****
RGB2VGA & cable (assembled) = $45
Programmed DE-0 Nano for RGB2VGA =
$95
*****

Just to clarify, for a fully functional board, both of these items are necessary. They are priced separately to allow the buyer to get the RGB2VGA bord from Zippster and the DE-0 Nano from another source. Both can be purchased from Zippster. Am I correct? :-) Salvador




-----Original Message-----
From: Zippster <zippster278 at gmail.com>
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
Sent: Fri, Aug 28, 2015 11:23 am
Subject: Re: [Coco] Getting into Tandy Color Computer 3, Suggestions and Info Needed


Hi Brandon,

Welcome to the group!

There is still room on the current run of
RGB2VGA boards.
It is a bit of an expensive, but excellent solution to getting
your CoCo3 running with
a VGA monitor.  

I’m also making the CoCo SDC units on
a regular basis, so they are available whenever
you want one.  John Strong is
making 3D printed cases for the SDC.

- Ed


Prices (not including
shipping):

RGB2VGA & cable (assembled) = $45
Programmed DE-0 Nano for RGB2VGA =
$95

CoCo SDC (assembled) = $40



> On Aug 28, 2015, at 10:51 AM, Brandon
Tetreau <brandon.tetreau at gmail.com> wrote:
> 
> Hi Everyone, Just wanted to
introduce myself. I grew up with the Tandy
> Color Computers and recently got
our system back from my parents. Got a
> couple Tandy Color Computer 3's a CM8
Monitor, multi-pack, floppy drives,
> etc... and tons of my old games on disk
and carts but It's tough getting
> the entire system setup. I started looking
into options to use the Tandy on
> newer hardware and was surprised to see Flash
Carts, video cables, and
> Drivewire and such which would really make running
old games easy but It
> appears I'm several years late as most types of Hardware
aren't sold
> anymore or have diagrams of electrical component blueprints which
cause my
> head to hurt.
> 
> I'm only 33 now so I was really young when we had
the CoCo but have tons of
> great memories (would love to get Ghana Bwana
running for my mom to play as
> it was one of her favorites) and would love to
get it up and running.
> I'm hoping to summarize what I think I've learnt in
searching the web for
> ways to connect the CoCo to a modern monitor and allow
playing of disk
> images.
> 
> Can any of you give me suggestions on what would
be a good setup? I don't
> mind having the entire system setup but it would also
be cool to just have
> the computer, maybe a flash cart and some joysticks.
> 
>
*Connecting Tandy to Monitor/TV*
> *RGB to S-Video* - Made by Chistopher Hawks,
emailed him but got no reply
> *RGB2VGA* - Appears they are for purchase
possibly by Zippster, not sure
> who can purchase
> 
> *CoCo Flash
Carts/Drivewire*
> *CoCo SDC *- CoCo flash cart which allows the running of disk
images from a
> Compact Flash Card (This allow you to run a HBDDOS rom and
connect to
> Drivewire)
> *Tandy Drive Pak* - Doesn't appear to be made anymore
but was a flash cart
> which ran most software expect software which needed to
be run specifically
> from a physical floppy drive (CoCo SDC fixes this
though?)
> *HDBDOS Rom Cart *- You can put a socket on a Cart and flash HDBDOS
and
> boot from that, I'm told people used to sell HDBDOS Rom Carts complete
but
> It doesn't appear anymore. I found various roms in the Drivewire
download
> but perhaps people have details about which carts can be used as a
donor,
> the socket I'd need to put on, compatible eeprom, and rom required to
make
> this.
> *Drivewire Cable* - Appears to still be sold on Cloud9 and can
also be made
> so I don't think this would be a huge issue, can also use a RS232
to USB
> cable to connect to USB.
> 
> -- 
> Coco mailing list
>
Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco


--

Coco mailing
list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco