[Coco] Run of RGB2VGA boards

[Mathieu Chouinard]

the de0-nano is a fpga based board so we can implement a lot
of circuit. the usage of a fpga here replace several ICs, todo the same thing
with a general purpose cpu in software would be hard, doable but hard

On Sun, Aug 16, 2015 at 2:33 PM, Kandur <k at qdv.pw> wrote:
> He was also asking about the Raspberry Pi, how about that?
>
>> I would ask the same question about a Raspberry Pi. This computer is a step up from the Arduino and has more hardware resources, plus it is not much more expensive than the Arduino.
>
> Kandur
>
> Sunday, August 16, 2015, 11:04:37 AM, you wrote:
>> An arduino cannot do it. It's a matter of speed and time and sync. Even if
>> you overclock it to 1Ghz you will deal with a extremely complex sync code,
>> counting instructions to perform it at the right time, because its just a cpu
>> running code. A fpga runs paced in the edge of its multiple clocks and perfect
>> timing fitting between each step and also most important: all in parallel.
>
>> Sent from my iPhone
>
>>> On Aug 16, 2015, at 10:46 AM, Salvador Garcia <ssalvadorgarcia at netscape.net> wrote:
>
>>> Not an expert on the DE-0 or the Arduino, but from what I do know of them I would assume that the Arduino can't handle this task. Hopefully I'll be corrected. :-)
>
>
>>> The DE-0, as such, and as I understand is an open ended device. The "program"that is loaded onto it configures is components so that it behaves a certain. For example, when it loads Gary's program for the FPGA Coco the, the DE configures it self not only as a 6809 microprocessor, but specifically as a Color Computer 3.
>
>
>>> On the other hand, the Arduino is a microcontroller based computer that just runs code. Of course, given enough code, any processor based product could be used to convert the RGB signals to VGA, but I suspect that the Arduino just does not have the necessary hardware resources to accomplish this task.
>
>
>>> I would ask the same question about a Raspberry Pi. This computer is a step up from the Arduino and has more hardware resources, plus it is not much more expensive than the Arduino.
>
>
>>> I hope someone else chimes in. If any of the above information is wrong I would like to corrected for the benefit of all. Salvador
>
>
>
>
>>> -----Original Message-----
>>> From: Barry Nelson <barry.nelson at amobiledevice.com>
>>> To: coco <coco at maltedmedia.com>
>>> Sent: Sat, Aug 15, 2015 11:06 pm
>>> Subject: Re: [Coco] Run of RGB2VGA boards
>
>
>>> I have a question, rather than a DE-0 Nano, could an Arduino Due be used to
>>> perform the video processing if software was developed to run on it? It has a 32
>>> bit processor running at 84 Mhz and is much less expensive than the DE-0 Nano.
>>> In theory it looks to me as if it might work...
>
>
>>> Coco mailing
>>> list
>>> Coco at maltedmedia.com
>>> https://pairlist5.pair.net/mailman/listinfo/coco
>
>
>
>
>>> Coco mailing list
>>> Coco at maltedmedia.com
>>> https://pairlist5.pair.net/mailman/listinfo/coco
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco



-- 
A te quaeso, sicut in Aeneidos libro quarto Aeneas, elocutus
desiderium erigendi suum obeliscum in templo Venereo Didonis, ab ea
quaesivit, tuae domi an meae?