[Coco] Coco3 and KVM switch

[Kandur]

Thanks Mark, this is the info I needed.

Kandur

Monday, November 24, 2014, 6:59:55 AM, you wrote:
> Kandur,
> No holes are made in the case. A slight vnotch can be cut into the top half
> of the coco that isn't seen even when the cable is removed. Exit is in the
> rear right corner is where I put them. Could also probably go out the cart slot.

> Just takes pressure off the cable and the cases.
> The PCB mounts into the vent holes under the keyboard.
>  Mark Marlette
> http://www.cloud9tech.com
> mark at cloud9tech.com

>       From: Kandur <k at qdv.pw>
>  To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com> 
>  Sent: Sunday, November 23, 2014 2:36 PM
>  Subject: Re: [Coco] Coco3 and KVM switch
>    
> Thanks Robert, can't find at Cloud9,
> what kind of socket is provided on their
> adapter to plug the PS/2 Keyboard in.
> Would I have to drill a hole in the case
> for the PS/2 Keyboard's cable?
> http://preview.tinyurl.com/qxdbosx
>  
> Kandur



> Sunday, November 23, 2014, 10:40:28 AM, you wrote:
>> Well I'm guessing there is no easy with that.  Using a ps2 keyboard, I 
>> have used KVM between PC and cloud9's ps2 adapter.

>> -RobertH

>> On 11/23/2014 11:23 AM, Kandur wrote:
>>> Additional info, the keyboard is USB.

>>> Kandur

>>> Sunday, November 23, 2014, 8:21:25 AM, you wrote:
>>>> Hi,
>>>> what is the easiest way to share a PC's keyboard with a Coco3 ?
>>>> The video switching works fine already.

> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco


>