[Coco] For sale? (Another SDC Case Attempt)

[Gabriel Holland]

I would be interested in 1 fully assembled, translucent.


--------------------------------------------
On Fri, 11/7/14, tim lindner <tlindner at macmess.org> wrote:

 Subject: [Coco] For sale? (Another SDC Case Attempt)
 To: "CoCoList for Color Computer Enthusiasts" <coco at maltedmedia.com>
 Date: Friday, November 7, 2014, 10:38 AM
 
 Thanks everyone for the kind words. I
 went and bought a bunch of
 scraps from tap plastic. Some clear, some translucent. For
 $14 I have
 the material to cut about 15 sets. For the clear plastic the
 engraved
 type is nice. But for translucent I would do a sticker as
 seen in my
 video.
 
 So a complete set would be:
 
 Top and bottom plate.
 3 x 0.5 inch #6 machine screws
 3 x 0.25 inch #6 machine screws
 1 x stand off 5/8 inch tall, 0.25 OD
 2 x stand off 1/8 inch tall, 0.25 OD
 2 x stand off 9/16 inch tall, 0.25 OD
 
 The stand offs might need some sanding down if the plastic
 is thicker than 3mm.
 
 This would be the assembly instructions:
 
 1. The holes in the plates are all pilot holes, drill them
 all to size
 to fit the screws.
 2. Using a 1/4 inch drill bit, flare the outside of each
 hole so the
 screw sits flush.
 3. Attach the 5/8 inch tall stand off to the top plate in
 the center
 hole with a 1/4 inch screw.
 4. Attach the 2, 9/16 inch tall stand offs to the top plate
 in the two
 end holes with 1/4 inch screws.
 5. Attach the 2, 1/8 inch tall stands offs in the bottom
 plate in the
 two end holes with 1/2 inch screws.
 6. Place the PCB on top of the bottom plate, aligning the
 two end holes.
 7. Bring the top plate together with the bottom plate,
 aligning center
 stand off and the two end screws.
 8. Screw the two end bottom plate screws to the two top
 plate stand offs.
 9. Screw the center stand off to the bottom plate with a 1/2
 inch screw.
 
 So...
 
 Would you want clear (like the pictures I posted yesterday)
 or
 translucent (like the video I posted this weekend)?
 How many would want completed cases, with plates and all the
 hardware,
 drilling and attaching?
 How many would want just the plates and hardware?
 How many would want just the plates?
 
 Let me know and I'll work up some prices.
 
 -- 
 --
 tim lindner
 
 -- 
 Coco mailing list
 Coco at maltedmedia.com
 https://pairlist5.pair.net/mailman/listinfo/coco