[Coco] MESSUI 0.154 with Becker port

[David Ladd]

On Wed, Aug 27, 2014 at 11:33 PM, Bill Nobel <b_nobel at hotmail.com> wrote:

> This is great info David,  I have had Nitros-9 booted in Mess with DW
> installed locally and worked. But now I can tie into my permanent DW Server.
>

Bill, your most welcome.  I googled it and figured I would share what I
found.  Save some time for those who are watching the list :D

So I figured I would share what I found :D


>
> Bill Nobel
>
> > On Aug 27, 2014, at 10:00 PM, David Ladd <dladd at realmspire.com> wrote:
> >
> > Thank you Guillaume.
> >
> > Also for anyone here that is using this mess on windows and runs their
> own
> > drivewire server on another system.  You can setup a port forward on your
> > system to the system running the drivewire server.
> >
> > Here is a example of the command that you will need to enter into the
> > command prompt.  This has been tested on windows 7 and I have been told
> it
> > works on 8 as well.
> >
> > --------------
> > netsh interface portproxy add v4tov4 listenport=65504
> > listenaddress=127.0.0.1 connectport=65504 connectaddress=192.168.4.212
> > --------------
> >
> > The connectaddress you will need to change to the IP on your network of
> the
> > system running the drivewire server.
> >
> >
> > Remember this information I am providing is only needed if you are
> running
> > drivewire server on a system other than the windows 7+ system running
> mess.
> >
> > Hope this helps :D
> >
> > --
> > David Ladd
> > --
> >
> >
> >
> > On Wed, Aug 27, 2014 at 5:26 AM, Guillaume Major <gmajor at videotron.ca>
> > wrote:
> >
> >> Thanks to the work of Richard Goedeken, the MESS emulator now supports
> the
> >> Becker port interface for DriveWire. For those like me who prefer the
> >> Windows style menus, I compiled the MESSUI version for 32 and 64 bit.
> >>
> >> You can get a copy on the Color Computer Archive at
> >> http://www.colorcomputerarchive.com/coco/Emulators/MESS/Windows/0154%
> >> 20with%20Becker%20port/
> >>
> >> Richard have added a new mess target 'coco3dw1' to emulate a Coco 3
> with a
> >> floppy drive controller containing an HDB-DOS ROM with Becker Port
> support
> >> instead of the DECB ROM. I modified his patch to add another target,
> >> 'coco2dw1' to emulate a Coco 2 instead. You will need the new ROMS,
> >> 'coco3dw1.zip' and 'coco2dw1.zip', to use the new targets. You can get
> the
> >> ROMS here:
> >>
> >> http://www.colorcomputerarchive.com/coco/Emulators/MESS/ROMS/
> >>
> >> Enjoy!
> >>
> >> Guillaume
> >>
> >>
> >>
> >> --
> >> Coco mailing list
> >> Coco at maltedmedia.com
> >> http://five.pairlist.net/mailman/listinfo/coco
> >>
> >
> > --
> > Coco mailing list
> > Coco at maltedmedia.com
> > http://five.pairlist.net/mailman/listinfo/coco
> >
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>