[Coco] MESSUI 0.154 with Becker port

Bill Nobel b_nobel at hotmail.com
Thu Aug 28 00:33:00 EDT 2014


This is great info David,  I have had Nitros-9 booted in Mess with DW installed locally and worked. But now I can tie into my permanent DW Server.

Bill Nobel

> On Aug 27, 2014, at 10:00 PM, David Ladd <dladd at realmspire.com> wrote:
> 
> Thank you Guillaume.
> 
> Also for anyone here that is using this mess on windows and runs their own
> drivewire server on another system.  You can setup a port forward on your
> system to the system running the drivewire server.
> 
> Here is a example of the command that you will need to enter into the
> command prompt.  This has been tested on windows 7 and I have been told it
> works on 8 as well.
> 
> --------------
> netsh interface portproxy add v4tov4 listenport=65504
> listenaddress=127.0.0.1 connectport=65504 connectaddress=192.168.4.212
> --------------
> 
> The connectaddress you will need to change to the IP on your network of the
> system running the drivewire server.
> 
> 
> Remember this information I am providing is only needed if you are running
> drivewire server on a system other than the windows 7+ system running mess.
> 
> Hope this helps :D
> 
> --
> David Ladd
> --
> 
> 
> 
> On Wed, Aug 27, 2014 at 5:26 AM, Guillaume Major <gmajor at videotron.ca>
> wrote:
> 
>> Thanks to the work of Richard Goedeken, the MESS emulator now supports the
>> Becker port interface for DriveWire. For those like me who prefer the
>> Windows style menus, I compiled the MESSUI version for 32 and 64 bit.
>> 
>> You can get a copy on the Color Computer Archive at
>> http://www.colorcomputerarchive.com/coco/Emulators/MESS/Windows/0154%
>> 20with%20Becker%20port/
>> 
>> Richard have added a new mess target 'coco3dw1' to emulate a Coco 3 with a
>> floppy drive controller containing an HDB-DOS ROM with Becker Port support
>> instead of the DECB ROM. I modified his patch to add another target,
>> 'coco2dw1' to emulate a Coco 2 instead. You will need the new ROMS,
>> 'coco3dw1.zip' and 'coco2dw1.zip', to use the new targets. You can get the
>> ROMS here:
>> 
>> http://www.colorcomputerarchive.com/coco/Emulators/MESS/ROMS/
>> 
>> Enjoy!
>> 
>> Guillaume
>> 
>> 
>> 
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> http://five.pairlist.net/mailman/listinfo/coco
>> 
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
> 



More information about the Coco mailing list