[Coco] coco xt-rtc adapter by Burke and Burke (From TandyCoCoForums)

[Stephen H. Fischer]

Hi,

Now I see the crystal, I missed that.

So tell him to just gamble on replacing the smart watch?

SHF

----- Original Message ----- 
From: "Bob Devries" <devries.bob at gmail.com>
To: "CoCoList for Color Computer Enthusiasts" <coco at maltedmedia.com>
Sent: Sunday, April 07, 2013 9:46 PM
Subject: Re: [Coco] coco xt-rtc adapter by Burke and Burke (From 
TandyCoCoForums)


> Pins 1 & 2, if that's the correct pins, are X1 and X2 respectively, and 
> usually have the 32kHz crystal connected. The photos would suggest that is 
> what is there, just the long leads were not clipped. Maybe someone 
> replaced the crystal?
>
> Regards, Bob Devries
> Dalby, QLD, Australia
>
> ----- Original Message ----- 
> From: "Stephen H. Fischer" <SFischer1 at Mindspring.com>
> To: "CoCoList for Color Computer Enthusiasts" <coco at maltedmedia.com>
> Sent: Monday, April 08, 2013 2:02 PM
> Subject: [Coco] coco xt-rtc adapter by Burke and Burke (From Tandy 
> CoCoForums)
>
>
>>
>> http://tandycoco.com/forum/viewtopic.php?p=865#p865
>>
>> Coco xt-rtc problems
>>
>> I have a coco xt-rtc adapter by Burke and Burke. This one is supposedly a 
>> pre-production model. Comes without a case. Bought it from a local 
>> recycler, who obtained it from a collector who claimed everything worked 
>> last time used.. Anyway, I can't get it to work, and from basic 
>> inspection, I can see what might be a loose jumper. I'm going to post a 
>> link to a my Flickr account, a close up of the board, maybe somebody can 
>> tell me if this needs to be soldered to one of the near by points.
>>
>>
>> http://www.flickr.com/photos/94829497@N08/8628815773/
>>
>> I am not sure if it was like this when I got it, or I damaged it on the 
>> way home.. Thanks!
>>
>> -Shane
>>
>> --------------------------------
>> Re: Coco xt-rtc problems
>>
>> http://www.flickr.com/photos/94829497@N08/8628815983/in/photostream/
>>
>> Does this help? The top right ic, top 2 pins on the left side..
>>
>> ------------------------------
>>
>> Hi,
>>
>> I do not have this device and cannot tell where this jumper should go 
>> from the pictures.
>>
>> Can anyone else help?
>>
>> SHF
>>
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> http://five.pairlist.net/mailman/listinfo/coco
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>