[Coco] Monitor for Fujitsu FM-7

[Fedor Steeman]

Lucky bastard!!! Those are awesome!
/Fedor

On 1 April 2011 06:33, Daniel MacMillan <dan at quakka.com> wrote:

> Gentlemen,
>
> After a very long search, I finally have been able to purchase a Fujitsu
> FM-7, and would like some advice re: how to best connect it to a color
> monitor.
>
> Per the following page, pinouts for the two color ports are:
>
> http://www.nausicaa.net/~lgreenf/fm7page.htm
>
> Monitor Pinouts
>
> COLOR CRT (DIN8):
>
>       x
>    7     6
>       8
>  3         1
>
>    5     4
>       2
>
> 1: +12V
> 2: GND
> 3: Video clock (2Mhz)
> 4: horizontal sync signal
> 5: vertical sync signal
> 6: red
> 7: green
> 8: blue
>
>
>
> Color CRT cable, CRT side digital 8pin (I-shape 8pin connector, S1308-SB)
>    +----------+
>    !5  6  7  8!
>    !1  2  3  4!
>    +----------+
>
> 1:open
> 2:red
> 3:green
> 4:blue
> 5:ground
> 6:ground
> 7:horizontal sync
> 8:verticle sync
>
>
> I have a number of color monitors with composite and svideo inputs, as
> well as CM-8 and Amiga 1080 monitors at my disposal, and can solder.
>
> Can anyone recommend which plug and monitor combo would likely work best?
>
> Thanks!
> -Dan
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>