[Coco] Howto for installing nitros9?

[Christopher Hawks]

Steven Hirsch said the following on 10/11/2008 03:27 PM:
> On Fri, 10 Oct 2008, Steven Hirsch wrote:
> 
>>> So can I assume you can boot OS9 Level II, but not NitrOS-9?
>>> And where'd you get these 40 track SS bootable images?
>>
>> Yes, OS9 L2 boots fine.  The nitros9 image I was using came from 
>> http://nitros9.lcurtisboyle.com/nitros9.html.
>>
>> Now that I know how to get them onto a physical disk, I'll try the 
>> images from sourceforge.
> 
> After a bit of grief writing the images under Linux, I was able to boot 
> a DSDD NitrOS-9 image :-).
> 
> Next question:  What environment is the NitrOS-9 source intended to be 
> built under?  The makefile calls an executable called simply 'os9' all 
> over the place and references a cross-assembler called 'mamou' (?).
> 
> Perhaps it's there somewhere, but I could not locate anything specific 
> about the build tools.
> 
> I need to setup for this since the B&B disk drivers are apparently only 
> provided in source form.

Steven:

	All the utilities you need are in toolshed, also available from sourceforge. 
Builds on Linux, Mac, and Windows.

-- 
Christopher R. Hawks
HAWKSoft
---------------------------------------------------------
We use Linux for all our mission-critical applications. Having the source
code means that we are not held hostage by anyone's support department.
	-- Russell Nelson, President of Crynwr Software