[Coco] Re : 512KB SRAM upgrade

jdaggett at gate.net jdaggett at gate.net
Thu Nov 23 15:25:58 EST 2006


Sylvain

I seriously doubt that the WE0 and WE1 lines remain high suring refresh. In order 
to do a refresh the row address is placed on the DRAM address lines and then the 
RAS and WE lines are pulled low. 

james

On 23 Nov 2006 at 10:23, Sylvain Rousseau wrote:

> Thank you James.
> 
> I don't have a scope at home to look at GIME refresh sequence.  I hope WE0 and WE1 stay high during the refresh so the WE signal to the SRAM will be high too and no write to SRAM will occure during refresh. I will look on the web if I can find more infomations on it.
> 
> If you find something, please let me know.
> 
> Best Regards,
> 
> Sylvain
> 
> 
> ----- Message initial ----
> De : "jdaggett at gate.net" <jdaggett at gate.net>
> À : CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
> Envoyé le : jeudi 23 novembre 2006, 10 h 00 min 00 s
> Objet : Re: [Coco] 512KB SRAM upgrade
> 
> 
> Sylvain
> 
> One isue that bothers me and I have to see how the GIME chip does refresh of 
> the dram chips. Right now there appears to be no way to inhibit the writes to the 
> SRAM via the row address during refresh. Not sure if that is going to be an issue 
> but first impressions says it will. 
> 
> I am not sure but I believe the GIME does refresh every horizontal blanking 
> period. I don't have a oscope to setup to measure when the GIME does refresh 
> right now. 
> 
> Everything looks good if and only if you are locked into using 256Kx16 SRAM. I 
> would stay away from LS TTL logic as propogation time could be an issue. Fast 
> Schotky logic would be prefered or as you mentioned doing it in a CPLD. 
>   
> 
> 
> james
> 
> 
> 
> On 22 Nov 2006 at 6:11, Sylvain Rousseau wrote:
> 
> > Hello,
> > 
> > I just finished the design for a 512KB sram upgrade for Coco3.  I have only one Coco3 so I'm afraid to try it in it until I got a spare Coco3 or a spare Gime chip.
> > 
> > If it works well, I want to make the design public.  I can give the design to Mary to put on the Coco Nutz E-zine.
> > 
> > If someone can help me to get a spare Coco3 or a spare Gime chip, please let me know.
> > 
> > P.S. I already have a spare MC68B09EP.
> > 
> > Regards,
> > 
> > Sylvain
> > Quebec
> > Canada
> > 
> > __________________________________________________
> > Do You Yahoo!?
> > En finir avec le spam? Yahoo! Courriel vous offre la meilleure protection possible contre les messages non nollicités 
> > http://mail.yahoo.ca Yahoo! Courriel  
> > 
> > -- 
> > Coco mailing list
> > Coco at maltedmedia.com
> > http://five.pairlist.net/mailman/listinfo/coco
> > 
> > 
> > -- 
> > No virus found in this incoming message.
> > Checked by AVG Free Edition.
> > Version: 7.5.430 / Virus Database: 268.14.13/546 - Release Date: 11/22/2006 9:01 AM
> > 
> 
> 
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
> 
> __________________________________________________
> Do You Yahoo!?
> En finir avec le spam? Yahoo! Courriel vous offre la meilleure protection possible contre les messages non nollicités 
> http://mail.yahoo.ca Yahoo! Courriel  
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
> 
> 
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.430 / Virus Database: 268.14.14/547 - Release Date: 11/22/2006 5:41 PM
> 





More information about the Coco mailing list