From gsee at sasktel.net  Wed Feb  4 10:46:54 2009
From: gsee at sasktel.net (Grant See)
Date: Wed, 04 Feb 2009 09:46:54 -0600
Subject: [NHRC-user]  nhrc4
Message-ID: <001501c986df$cdf256d0$69d70470$@net>

Jeff

Is there a simple set of control strings for the NHRC4
I seem to have difficulty figuring out the commands for timers and switching
controls also to set a user group command that wil let other turn on the
link radio. 
I am sure it is just me but I am not a programmer just a owner/user
There was a command list for the older NHRC4 that made life easy but this
person needs help.
BTW the NHRC4 is controlling a MSR2000 and a simplex link to a remote UHF
repeater.

Grant
VE5SS




From jeff at nhrc.net  Wed Feb  4 17:25:56 2009
From: jeff at nhrc.net (Jeff Otterson)
Date: Wed, 04 Feb 2009 17:25:56 -0500
Subject: [NHRC-user] nhrc4
In-Reply-To: <001501c986df$cdf256d0$69d70470$@net>
References: <001501c986df$cdf256d0$69d70470$@net>
Message-ID: <6.1.2.0.2.20090204172519.02ec5818@mail.nhrc.net>

Hi,

This is what I use.

Jeff

At 10:46 AM 2/4/2009, you wrote:
>Jeff
>
>Is there a simple set of control strings for the NHRC4
>I seem to have difficulty figuring out the commands for timers and switching
>controls also to set a user group command that wil let other turn on the
>link radio.
>I am sure it is just me but I am not a programmer just a owner/user
>There was a command list for the older NHRC4 that made life easy but this
>person needs help.
>BTW the NHRC4 is controlling a MSR2000 and a simplex link to a remote UHF
>repeater.
>
>Grant
>VE5SS
>
>
>
>_______________________________________________
>NHRC-user mailing list
>NHRC-user at nhrc.net
>http://five.pairlist.net/mailman/listinfo/nhrc-user
-------------- next part --------------
NHRC-4 Repeater Controller                         Proprietary and Confidential
Implemented Commands                                                   NHRC LLC
Version 3.00C
22 October 2003
rev 09 September 2005

*********************
** LOCKED COMMANDS **
*********************

  Prefix  Default  Action
  Number  Prefix

    00      00     Control operator access 
                   (prefix) <group-digit> <item-digit> [<optional-state-digit>]
                   set group <g> item <i> to state <s>
                   0 <= g <= 7   group to program
                   0 <= i <= 7   item to program
                   s = 0,1       state to set 1=on
                   omit state to enquire value.
		   controller will confirm with CW message "ON" or "OFF"

    01      01     DTMF access
                   (prefix) 1 enable repeater when in DTMF access mode.
                     Repeater says "OK" in CW
                     Repeater stays up until timer 6 (x 10) seconds 
                     of idle time elapses, when it will ID and disable.
                   (prefix) 0 disable repeater when in DTMF access mode.
                     Immediatly "locks" repeater until (prefix) 1 is 
                     received again.

    02      02     digital output control

                     (prefix) [<state>]
                     <state> = 0 turn port off
                     <state> = 1 turn port on
                     <state> = blank inquire port status

		     will send CW "ERR" if fan control is enabled.
		     
    03      03     load saved setup
                     (prefix) <digit> : load selected saved control operator
		     groups.  digit must be in the range of 0-1.

    04      04     remote base control
                     (prefix) 0 remote base off
                     (prefix) 1 remote base alert mode
                     (prefix) 2 remote base receive mode
                     (prefix) 3 remote base transmit mode

    05      05     enable control access ("unlock" controller)
                   (prefix) will unlock the controller.
                   "#" to lock again.

***********************
** UNLOCKED COMMANDS **
***********************

  # lock controller.

  *0
  Control Operator Access
    *0<g><i><s> set group <g> item <i> to state <s>
      0 <= g <= 9   group to program
      0 <= i <= 7   item to program
      s = 0,1       state to set 1=on
      leave s blank to inquire on/off state

  *1
  Save Setup
    *1<s> save set of control operator groups #<s> 
      0 <= s <= 1   state number to save.  set #0 is the power-up default.

  *2 
  Program Command Prefix
    *2<pp><prefix>  program prefix <p> with prefix
      00 <= pp <= 15   prefix index
      <prefix>         code to use as prefix.  1-7 digits.
      
      Prefixes by index
      00  control operator
      01  dtmf access
      02  digital output control
      03  load saved setup
      04  remote base
      05  unlock controller

  *3  
  Set Timers
    *3<nn><time> set timer nn to time
      00 <= nn <= 11  timer index
      0 <= time <= 255 timer preset. 0=disable

      Timer Indexes
      00  hang timer long  (tenths)
      01  hang timer short (tenths)
      02  id timer (tens)
      03  DTMF access timer (tens)
      04  timeout timer long (seconds)
      05  timeout timer short (seconds)
      06  fan timer (tens)
      07  CW tone  (1-31)
      08  CW speed (5-30)

  *7
  Record/Play CW and Courtesy Tones
   *70 play CW ID
   *70 <dd..dd..dd..> program cw message n with CW data in dd.dd.dd
                      see CW encoding table.

   *71<n> play courtesy tone n, 0 <= n <= 7 (n is in range 0 to 7)
   *71<n><ddtt,ddtt...> record courtesy tone n, 0 <= n <= 7 
         dd is duration in 10 ms increments. 01 <= dd <=99
            first duration can have magic value 00 or 99.
            magic value 99 will play morse letter in tone field.
         tt is tone.  See tone table.  00 <= tt <= 31

  ** (*E)
  Debug Reset via WDT Timeout
    **  infinite loop into WDT reset.


*****************************
* Control Operator Switches *
*****************************

Group	Item    Description			Default	Comment

0	0	Repeater Enable			1	
0	1	reserved			0
0	2	key up delay (kerchunk filter)	0	
0	3	Hang Timer Enabled		1	
0	4	Hang timer short/long select	0	0=short, 1=long, see related timers
0	5	DTMF access mode		0	see DTMF access code and timer 
0	6	courtesy tone enabled		1	
0	7	reserved			0

1	0	repeater time out timer enable	1	see related timer value
1	1	time out long / short		1	0=short, 1=long, see related timers
1	2	reserved			0
1	3	Enable DTMF Muting		1	Repeater mutes touch tones
1	4	reserved			0
1	5	link port is slaved repeater	0	link port TX follows main port TX when on
1	6	reserved			0
1	7	reserved			0

2	0	reserved			0
2	1	reserved			0
2	2	reserved			0
2	3	reserved			0
2	4	Digital output/Fan Control	0	0=digital output, 1=fan control
2	5	Digital output control		0	1=on, 0=off
2	6	Delay present main port		0	NHRC-DAD installed on main port.
2	7	Delay present link port      	0	NHRC-DAD installed on link port.

3	0	link port alert mode            0	
3	1	link port receive mode         	0	
3	2	link port transmit mode        	0	
3	3	Main port receiver has priority 0	1 to give priority to main port.
3	4	reserved			0
3	5	link port timeout timer enable 	0	see related timer value
3	6	link port timeout long/short   	0	0=short, 1=long, see related timers
3	7	link port drops to mute DTMF   	0	

4	0	reserved                  	0	
4	1	reserved                  	0	
4	2	reserved                  	0	
4	3	reserved                  	0	
4	4	reserved                  	0	
4	5	reserved                  	0	
4	6	Drop TX to mute DTMF         	0	
4	7	NHRC Test Mode                 	0	0=disabled, 1=enabled.

5	0	reserved                  	0	
5	1	reserved                  	0	
5	2	reserved                  	0	
5	3	reserved                  	0	
5	4	reserved                  	0	
5	5	reserved                  	0	
5	6	reserved                     	0	
5	7	reserved                       	0	

6	0	reserved			0
6	1	reserved			0
6	2	reserved			0
6	3	reserved			0
6	4	reserved                  	0	
6	5	reserved                  	0	
6	6	reserved                     	0	
6	7	reserved                       	0	

7	0	reserved             		0	
7	1	reserved             		0	
7	2	reserved             		0	
7	3	reserved             		0	
7	4	reserved             		0	
7	5	reserved             		0	
7	6	reserved   
7	7	reserved   

8*	0	write protect control group setups	0	
8*	1	write protect prefixes	        0
8*	2	write protect timers		0	
8*	3	(reserved)
8*	4	(reserved)
8*	5	(reserved)
8*	6	write protect CW messages & courtesy tones	0	
8*	7	(reserved)

9*	0	enable access to group 0	1	
9*	1	enable access to group 1	1	
9*	2	enable access to group 2	1	
9*	3	enable access to group 3	1	
9*	4	enable access to group 4	1	
9*	5	enable access to group 5	1	
9*	6	enable access to group 6	1	
9*	7	enable access to group 7	1	

* controller must be unlocked to access groups 8 and 9

**************
** CW Table **
**************

letter  code
0	00
1	01
2	02
3	03
4	04
5	05
6	06
7	07
8	08
9	09
a	21
b	22
c	23
d	31
e	32
f	33
g	41
h	42
i	43
j	51
k	52
l	53
m	61
n	62
o	63
p	71
q	70
r	72
s	73
t	81
u	82
v	83
w	91	
x	92
y	93
z	90
space   11
/       12

Courtesy Tone Pitch Table
-------- ---- ----- -----

Tone	Note   Pitch   Actual
  #	        Hz       Hz

  0	none    0.00     0.00
  1	f4    249.25   249.28
  2	f#4   370.00   370.03
  3	g4    392.00   392.00
  4	g#4   415.30   415.37
  5	a4    440.00   440.04
  6	a#4   466.15   444.20
  7	b4    493.90   493.95
  8	c5    523.25   523.29
  9	c#5   554.35   554.48
 10	d5    587.35   587.37
 11	d#5   622.30   622.47
 12	e5    659.30   659.41
 13	f5    698.50   698.57
 14	f#5   740.00   740.19
 15	g5    784.00   784.01
 16	g#5   830.60   830.91
 17	a5    880.00   880.29
 18	a#5   932.30   932.40
 19	b5    987.80   988.14
 20	c6   1046.50  1046.58
 21	c#6  1108.70  1109.26
 22	d6   1174.70  1175.09
 23	d#6  1244.50  1244.56
 24	e6   1318.50  1319.26
 25	f6   1397.00  1397.62
 26	f#6  1480.00  1480.38
 27	g6   1568.00  1568.63
 28	g#6  1661.20  1662.51
 29	a6   1760.00  1760.56
 30	a#6  1864.70  1865.67
 31	b6   1975.50  1976.28

Program N1KDO as CW ID:

  *70 62 01 52 31 63
 
Program KA1OKQ as CW ID:

  *70 52 21 01 63 52 70
 

From jeff at nhrc.net  Wed Feb  4 17:54:10 2009
From: jeff at nhrc.net (Jeff Otterson)
Date: Wed, 04 Feb 2009 17:54:10 -0500
Subject: [NHRC-user] nhrc4
In-Reply-To: <1195dce0902041430j7123bf04kb638b62964dc908b@mail.gmail.com
 >
References: <001501c986df$cdf256d0$69d70470$@net>
	<6.1.2.0.2.20090204172519.02ec5818@mail.nhrc.net>
	<1195dce0902041430j7123bf04kb638b62964dc908b@mail.gmail.com>
Message-ID: <6.1.2.0.2.20090204175018.03016160@mail.nhrc.net>

Yes I do.

Here it is.

Please understand, these are not a substitute for the official 
documentation.  These are cheat sheets I made up for myself for testing 
during software development.

Jeff

At 05:30 PM 2/4/2009, you wrote:
>Jeff:
>
>Any chance you have something similar for the NHRC7?
>
>73s,
>
>AJ, K6LOR/R
>147.080+
>444.750+
>
>On Wed, Feb 4, 2009 at 3:25 PM, Jeff Otterson 
><<mailto:jeff at nhrc.net>jeff at deleted> wrote:
>Hi,
>
>This is what I use.
>
>Jeff
>
>
>At 10:46 AM 2/4/2009, you wrote:
>Jeff
>
>Is there a simple set of control strings for the NHRC4
>I seem to have difficulty figuring out the commands for timers and switching
>controls also to set a user group command that wil let other turn on the
>link radio.
>I am sure it is just me but I am not a programmer just a owner/user
>There was a command list for the older NHRC4 that made life easy but this
>person needs help.
>BTW the NHRC4 is controlling a MSR2000 and a simplex link to a remote UHF
>repeater.
>
>Grant
>VE5SS
>
>
>
>_______________________________________________
>NHRC-user mailing list
><mailto:NHRC-user at nhrc.net>NHRC-user at nhrc.net
>http://five.pairlist.net/mailman/listinfo/nhrc-user
>
>
>_______________________________________________
>NHRC-user mailing list
><mailto:NHRC-user at nhrc.net>NHRC-user at nhrc.net
>http://five.pairlist.net/mailman/listinfo/nhrc-user
>
-------------- next part --------------
NHRC-7 Repeater Controller                         Proprietary and Confidential
Implemented Commands                                                   NHRC LLC
Version 1.10
26 February 2004

*********************
** LOCKED COMMANDS **
*********************

  Prefix  Default  Action
  Number  Prefix

    00      00     Control operator access 
                   (prefix) <group-digit> <item-digit> [<optional-state-digit>]
                   set group <g> item <i> to state <s>
                   0 <= g <= 7   group to program
                   0 <= i <= 7   item to program
                   s = 0,1       state to set 1=on
                   omit state to enquire value.
		   controller will confirm with speech: 
                   control x point y is enabled|disabled.

    01      01     DTMF access
                   (prefix) 1 enable repeater when in DTMF access mode.
                     Repeater plays "OK" in CW.
                     Repeater stays up until timer 6 (x 10) seconds 
                     of idle time elapses, when it will play "OFF" in CW.
                   (prefix) 0 disable repeater when in DTMF access mode.
                     Immediatly "locks" repeater until (prefix) 1 is 
                     received again.

    02      02     digital output control
                     (prefix) [<state>]
                     <state> = 0 turn port off
                     <state> = 1 turn port on
                     <state> = blank inquire port status

    03      03     load saved setup
                     (prefix) <digit> : load selected saved control operator
		     groups.  digit must be in the range of 0-4.

    04      04     link state control
                     (prefix) <receiver-1-digit> <receiver-2-digit>
                     <receiver-1-digit>, <receiver-2-digit> 0 (none), 1, 2, or 3(both)

		     example: turn everything off
			      (prefix)00
			      turn on 2 duplex repeaters
			      (prefix)12
			      turn on 2-way half-duplex link
			      (prefix)21
			      turn on repeater 1 with link on repeater 2
			      (prefix)31

    05      05     digital output control

                     (prefix) <port-digit> [<state>]
		     1 <= port digit <= 4, 1=EXP3, 2=EXP4, 3=EXP5 4=EXP6
                     <state> = 0 turn port off
                     <state> = 1 turn port on
                     <state> = blank inquire port status

    06      06     reset alarm
                   (prefix) will reset the alarm.

    07      07     enable control access ("unlock" controller)
                   (prefix) will unlock the controller.
                   "#" to lock again.



***********************
** UNLOCKED COMMANDS **
***********************

  # lock controller.

  *0
  Control Operator Access
    *0<g><i><s> set group <g> item <i> to state <s>
      0 <= g <= 9   group to program
      0 <= i <= 7   item to program
      s = 0,1       state to set 1=on
      leave s blank to inquire on/off state

  *1
  Save Setup
    *1<s> save set of control operator groups #<s> 
      0 <= s <= 4   state number to save.  set #0 is the power-up default.

  *2 
  Program Command Prefix
    *2<pp><prefix>  program prefix <p> with prefix
      00 <= pp <= 15   prefix index
      <prefix>         code to use as prefix.  1-7 digits.
      
      Prefixes by index
      00  control operator
      01  dtmf access
      02  digital output control
      03  load saved setup
      04  link state control
      05  digital output control
      06  reset alarm
      07  unlock controller

  *3  
  Set Timers
    *3<nn><time> set timer nn to time
      00 <= nn <= 11  timer index
      0 <= time <= 255 timer preset. 0=disable

      Timer Indexes
      00  hang timer long  (tenths)
      01  hang timer short (tenths)
      02  id timer, transmitter 0 (tens)
      03  id timer, transmitter 1 (tens)
      04  DTMF access timer (tens)
      05  timeout timer long (seconds)
      06  timeout timer short (seconds)
      07  fan timer (tens)
      08  alarm interval timer, (tens) 
      09  tx1 courtesy tone front porch delay, 10 ms
      10  tx2 courtesy tone front porch delay, 10 ms
      11  tx1 cw pitch (1-31)
      12  tx1 cw speed (5-30)
      13  tx2 cw pitch (1-31)
      14  tx2 cw speed (5-30)

  *7
  Record/Play CW and Courtesy Tones
   *70<n> play CW ID n, n is 0 or 1
   *70<n> <dd..dd..dd..> program cw message n with CW data in dd.dd.dd
                      see CW encoding table.

   *71<n> play courtesy tone n, 0 <= n <= 7 (n is in range 0 to 7)
   *71<n><ddtt,ddtt...> record courtesy tone n, 0 <= n <= 7 
         dd is duration in 10 ms increments. 01 <= dd <=99
            first duration can have magic value 00 or 99.
            magic value 00 will play tail message track (#4).
            magic value 99 will play morse letter in tone field.
         tt is tone.  See tone table.  00 <= tt <= 31

` ** (*E)
  Debug Reset via WDT Timeout
    **  infinite loop into WDT reset.

*****************************
* Control Operator Switches *
*****************************

Group	Item    Description			Default	Comment

0		Receiver 1 Access Control
----------------------------------------------------------------
0	0	Receiver 1 Enable		1	
0	1	Receiver 1 CTCSS Required	0	
0	2	Receiver 1 Dual Squelch         0
0	3	Receiver 1 DTMF access mode	0
0	4	Receiver 1 encode tone TX1	0
0	5	Receiver 1 encode tone TX2	0
0	6	Receiver 1 into Transmitter 1	1
0	7	Receiver 1 into Transmitter 2	0

1		Receiver 1 Configuration
----------------------------------------------------------------
1	0	Receiver 1 key up delay 	0	
1	1	Time Out Timer enable		1
1	2	time out long / short		1	0=short, 1=long, see related timers
1	3	(reserved for NHRC)		0
1	4	Audio Delay present		0	NHRC-DAD installed on this port.
1	5	(reserved for NHRC)		0
1	6	Mute DTMF into Transmitter 1	1	Touch Tones don't go to Transmitter 1
1	7	Mute DTMF into Transmitter 2	1	Touch Tones don't go to Transmitter 2


2		Receiver 2 Access Control
----------------------------------------------------------------
2	0	Receiver 2 Enable		1	
2	1	Receiver 2 CTCSS Required	0	
2	2	Receiver 2 Dual Squelch         0
2	3	Receiver 2 DTMF access mode	0
2	4	Receiver 2 encode tone TX1	0
2	5	Receiver 2 encode tone TX2	0
2	6	Receiver 2 into Transmitter 1	0
2	7	Receiver 2 into Transmitter 2	1

3		Receiver 1 Configuration
----------------------------------------------------------------
3	0	Receiver 2 key up delay 	0	
3	1	Time Out Timer enable		1
3	2	time out long / short		1	0=short, 1=long, see related timers
3	3	(reserved for NHRC)		0
3	4	Audio Delay present		0	NHRC-DAD installed on this port.
3	5	(reserved for NHRC)		0
3	6	Mute DTMF into Transmitter 1	1	Touch Tones don't go to Transmitter 1
3	7	Mute DTMF into Transmitter 2	1	Touch Tones don't go to Transmitter 2

4		Transmitter 1 Control
----------------------------------------------------------------
4	0	Transmitter 1 Transmit Enable	1
4	1	Transmitter 1 Hang Time Enable	1	1=enable
4	2	Hang timer short/long select	0	0=short, 1=long, see related timers
4	3	Transmitter 1 ID enable		1	
4	4	Transmitter 1 ID select		0	0=ID 1, 1=ID 2
4	5	Transmitter 1 duplex select	0	0=simplex, 1=duplex
4	6	TX1 RX1 Courtesy Tone Enable    1	0=off, 1=on
4	7	TX1 RX2 Courtesy Tone Enable	1	0=off, 1=on

5		Transmitter 2 Control
----------------------------------------------------------------
5	0	Transmitter 2 Transmit Enable	1
5	1	Transmitter 2 Hang Time Enable	1	1=enable
5	2	Hang timer short/long select	0	0=short, 1=long, see related timers
5	3	Transmitter 2 ID enable		1	
5	4	Transmitter 2 ID select		0	0=ID 1, 1=ID 2
5	5	Transmitter 2 duplex select	0	0=simplex, 1=duplex
5	6	TX2 RX1 Courtesy Tone Enable    1	0=off, 1=on
5	7	TX2 RX2 Courtesy Tone Enable	1	0=off, 1=on

6		Misc. Settings.
----------------------------------------------------------------
6	0	Fan Control/Digital Output	0	0=fan control, 1=digital output
6	1	Digital Output Control		0	0=off, 1=on
6	2	Digital Output Pulsed Mode	0	0=on/off, 1=pulsed
6	3	Alarm Input Enable		0	set to 1 to set alarm.
6	4	Control RX confirm TX1		0	set to 1 to have control RX confirm to TX1.
6	5	Control RX confirm TX2		0	set to 1 to have control RX confirm to TX2.
6	6	Chicken Burst control, TX1	0
6	7	Chicken Burst control, TX2	0

7		Digital Output Settings
----------------------------------------------------------------
7	0	Digital Output 1 Port Control	0
7	1	Digital Output 2 Port Control	0
7	2	Digital Output 3 Port Control	0
7	3	Digital Output 4 Port Control	0
7	4	Digital Output 1 Pulsed Mode 	0
7	5	Digital Output 2 Pulsed Mode	0
7	6	Digital Output 3 Pulsed Mode	0
7	7	Digital Output 4 Pulsed Mode	0

8		Control Write Protects
---------------------------------------------------------------
8*	0	write protect control group setups	0	
8*	1	write protect prefixes	        0
8*	2	write protect timers		0	
8*	3	(reserved)			0
8*	4	(reserved)			0
8*	5	(reserved)			0
8*	6	write protect CW messages & courtesy tones	0	
8*	7	NHRC TEST MODE	 		0

8		Control Operator Security Configuration
---------------------------------------------------------------
9*	0	enable access to group 0	1	
9*	1	enable access to group 1	1	
9*	2	enable access to group 2	1	
9*	3	enable access to group 3	1	
9*	4	enable access to group 4	1	
9*	5	enable access to group 5	1	
9*	6	enable access to group 6	1	
9*	7	enable access to group 7	1	

* controller must be unlocked to access groups 8 and 9

**************
** CW Table **
**************

letter  code
0	00
1	01
2	02
3	03
4	04
5	05
6	06
7	07
8	08
9	09
a	21
b	22
c	23
d	31
e	32
f	33
g	41
h	42
i	43
j	51
k	52
l	53
m	61
n	62
o	63
p	71
q	70
r	72
s	73
t	81
u	82
v	83
w	91	
x	92
y	93
z	90
space   11
/       12


 
Courtesy Tones Programming Data:

  *71 n [dddd [dddd [dddd [dddd]]]]

0: rx1 --> tx1 : 05 8c 05 8f 05 93 05 16 :  5-E5  5-G5  5-B5  5-D6 : 0512 0515 0519 0522
1: rx1 --> tx2 : 05 8c 05 8f 05 93 05 16 :  5-E5  5-G5  5-B5  5-D6 : 0512 0515 0519 0522
2: rx2 --> tx1 : 05 96 05 93 05 8f 05 0d :  5-D6  5-B5  5-G5  5-E5 : 0522 0519 0515 0512
3: rx2 --> tx2 : 05 96 05 93 05 8f 05 0d :  5-D6  5-B5  5-G5  5-E5 : 0522 0519 0515 0512
4: ctsel ?     : 99 01 ff                : cw 1                    : 9901
5: ctsel ?     : 99 02 ff                : cw 2                    : 9902
6: ctsel ?     : 99 03 ff                : cw 3                    : 9903
7: unlocked ct : 0a 9f 0a 93 0a 9f 0a 93 : 10-G5 10-B5 10-G5 10-B5 : 1031 1019 1031 1019 

Digital I/O

EXP1 digital input 1  ALARM when low
EXP2 digital input 2  ct4 select when low (CW 1)
EXP3 digital input 3  ct5 select when low (CW 2)
EXP4 digital input 4  ct6 select when low (CW 3)
EXP5 digital output 1 / TX1 encoder control
EXP6 digital output 2 / TX2 encoder control
EXP7 digital output 3
EXP8 digital output 4