From gsee at sasktel.net  Sun Jun 15 17:08:37 2008
From: gsee at sasktel.net (Grant See)
Date: Sun, 15 Jun 2008 15:08:37 -0600
Subject: [NHRC-user] nhrc4
In-Reply-To: <6.1.2.0.2.20080511183929.0451c498@mail.nhrc.net>
References: <000301c8b3aa$3ec59ed0$bc50dc70$@net>
	<6.1.2.0.2.20080511183929.0451c498@mail.nhrc.net>
Message-ID: <000301c8cf2b$fb0dad20$f1290760$@net>

Hi Jef,

I made some major changes since your email. Now putting my NHRC4 into a
MSR2000. Morified the card with Skips suggestions but do I need the CAS
inverter for card. Cant seem to get it to turn on the repeater. Repeater
works fine with a standard card.

Grant\VE5SS 




From jeff at nhrc.net  Sun Jun 15 17:41:16 2008
From: jeff at nhrc.net (Jeff Otterson)
Date: Sun, 15 Jun 2008 17:41:16 -0400
Subject: [NHRC-user] nhrc4
In-Reply-To: <000301c8cf2b$fb0dad20$f1290760$@net>
References: <000301c8b3aa$3ec59ed0$bc50dc70$@net>
	<6.1.2.0.2.20080511183929.0451c498@mail.nhrc.net>
	<000301c8cf2b$fb0dad20$f1290760$@net>
Message-ID: <6.1.2.0.2.20080615174056.03734a18@mail.nhrc.net>

What does the circuit you are using for an inverter look like?

Jeff

At 05:08 PM 6/15/2008, you wrote:
>Hi Jef,
>
>I made some major changes since your email. Now putting my NHRC4 into a
>MSR2000. Morified the card with Skips suggestions but do I need the CAS
>inverter for card. Cant seem to get it to turn on the repeater. Repeater
>works fine with a standard card.
>
>Grant\VE5SS
>
>
>
>_______________________________________________
>NHRC-user mailing list
>NHRC-user at nhrc.net
>http://five.pairlist.net/mailman/listinfo/nhrc-user


From gsee at sasktel.net  Sun Jun 15 17:59:33 2008
From: gsee at sasktel.net (Grant See)
Date: Sun, 15 Jun 2008 15:59:33 -0600
Subject: [NHRC-user] nhrc4
In-Reply-To: <6.1.2.0.2.20080615174056.03734a18@mail.nhrc.net>
References: <000301c8b3aa$3ec59ed0$bc50dc70$@net>
	<6.1.2.0.2.20080511183929.0451c498@mail.nhrc.net>
	<000301c8cf2b$fb0dad20$f1290760$@net>
	<6.1.2.0.2.20080615174056.03734a18@mail.nhrc.net>
Message-ID: <000a01c8cf33$182e2c20$488a8460$@net>

Jeff, I haven't used it yet but if needed I will use the one on your site
with the 2 10k resistors and the 3904 or some available transistor.
I wonder if I can use the signal frompin5 on the card instead?
Grant VE5SS




From gsee at sasktel.net  Mon Jun 16 16:25:28 2008
From: gsee at sasktel.net (Grant See)
Date: Mon, 16 Jun 2008 14:25:28 -0600
Subject: [NHRC-user] nhrc4
In-Reply-To: <6.1.2.0.2.20080511183929.0451c498@mail.nhrc.net>
References: <000301c8b3aa$3ec59ed0$bc50dc70$@net>
	<6.1.2.0.2.20080511183929.0451c498@mail.nhrc.net>
Message-ID: <002101c8cfef$1e856090$5b9021b0$@net>

Jeff the problem was not with the controller it was with the squelch card.
Found the problem and have it working.... Finally!

Grant VE5SS