[LSC] File format restrictions for official part files

[LDraw]

do you want me to set up a scratch pad for these pieces?

w.



William Howard schrieb:

> And another piece of text that needs to be in this document that was in 

> the 1.0 draft spec doc

>  

> * All files in the LDraw Parts Library must carry the DAT extension.

> 

>     ----- Original Message -----

>     *From:* William Howard <mailto:william at howard-family.fsworld.co.uk>

>     *To:* LDraw Standards Committee <mailto:lsc at ldraw.org>

>     *Sent:* Tuesday, September 11, 2007 9:06 AM

>     *Subject:* [LSC] File format restrictions for official part files

> 

>     The following text/comments were removed from the LDraw File Format

>     1.0 spec and so need a new home

>      

>     * Official LDraw filenames (such as parts) may not be more than 25

>     characters long (including the extension)

>     and may only contain the following characters: a-z, A-Z, 0-9, _, -,

>     and . (to avoid confusion with

>     English grammar, comma is not permitted while period (full-stop) is

>     permitted).

>      

>     * "Write/Print" should note that this is not allowed in official

>     parts files

>      

>      

>     We probably need a new document for these.

> 

>     ------------------------------------------------------------------------

> 

>     _______________________________________________

>     LSC mailing list

>     LSC at ldraw.org

>     http://five.pairlist.net/mailman/listinfo/lsc

> 

> 

> ------------------------------------------------------------------------

> 

> _______________________________________________

> LSC mailing list

> LSC at ldraw.org

> http://five.pairlist.net/mailman/listinfo/lsc