[LSC] File format restrictions for official part files

[William Howard]

And another piece of text that needs to be in this document that was in the 1.0 draft spec doc

* All files in the LDraw Parts Library must carry the DAT extension.
  ----- Original Message ----- 
  From: William Howard 
  To: LDraw Standards Committee 
  Sent: Tuesday, September 11, 2007 9:06 AM
  Subject: [LSC] File format restrictions for official part files


  The following text/comments were removed from the LDraw File Format 1.0 spec and so need a new home

  * Official LDraw filenames (such as parts) may not be more than 25 characters long (including the extension) 
  and may only contain the following characters: a-z, A-Z, 0-9, _, -, and . (to avoid confusion with 
  English grammar, comma is not permitted while period (full-stop) is permitted).

  * "Write/Print" should note that this is not allowed in official parts files


  We probably need a new document for these.



------------------------------------------------------------------------------


  _______________________________________________
  LSC mailing list
  LSC at ldraw.org
  http://five.pairlist.net/mailman/listinfo/lsc
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://five.pairlist.net/pipermail/lsc/attachments/20070917/1907d1f0/attachment.htm>