[LSC] File Format Restrictions for Official Parts

[Philo]

These parts exemplify what I said - they should be cleaned in at least 
two points of view:
- no remaining LSynth meta commands (constraints could be left as 
comments to be able to modyfy/regenerate the part later)
- trailing 0 should be trimmed (and probably precision somewhat reduced)

Philo


> See

> http://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/5306c01.dat

> http://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/2982c02.dat

> http://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/2977c02.dat

> 

> ----- Original Message ----- From: "Philo" <philohome at free.fr>

> To: "LDraw Standards Committee" <lsc at ldraw.org>

> Sent: Wednesday, November 14, 2007 9:08 AM

> Subject: Re: [LSC] File Format Restrictions for Official Parts

> 

> 

>> What do you mean with "What about embedded expanded LSYNTH commands 

>> (eg wires)"?

>>

>> IMHO Lsynth commands should be restricted to models, not parts. And if 

>> a part (wire, tube...) is created with LSynth it should be cleaned-up 

>> before submitting to tracker.

>>

>> Philo

>> _______________________________________________

>> LSC mailing list

>> LSC at ldraw.org

>> http://five.pairlist.net/mailman/listinfo/lsc

>>

> 

> _______________________________________________

> LSC mailing list

> LSC at ldraw.org

> http://five.pairlist.net/mailman/listinfo/lsc

> 

>