[Coco] 3D printed 5 1/4 Gotek drive cover

[rietveld rietveld]

I did not design this.  I got the PRINT from Thingiverse .  It is made for the IBM . its a 5 piece print because of the lever that is used to select .dsk images. It took about 24 hrs to print all the parts.

Sent from my BlackBerry — the most secure mobile device
From: go4retro at go4retro.com
Sent: December 6, 2020 7:09 PM
To: coco at maltedmedia.com
Reply to: coco at maltedmedia.com
Subject: Re: [Coco] 3D printed 5 1/4 Gotek drive cover

On 12/6/2020 5:33 PM, rietveld rietveld wrote:
> Here is a cover i printed for the Gotek that i am using as Drive 1 in my FD502 case.   The OLED and USB are tucked in the middle opening and the drive closure lever scrolls the menu when you move it open and closed(up and down)
>
> 3D printed 5 1/4  Gotek drive cover https://imgur.com/gallery/DzAn9Xl
>
>
> Sent from my BlackBerry — the most secure mobile device
>
STL files?

--
RETRO Innovations, Contemporary Gear for Classic Systems
www.go4retro.com<http://www.go4retro.com>
store.go4retro.com


--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco