[Coco] CoCoSDC on TANO Dragon

[rietveld rietveld]

Sure    i will post a link to that as well as the ultimate dragon sdc image of games that i put together

see my video for that

 https://youtu.be/-aEWgoSpLEc


Sent from my BlackBerry — the most secure mobile device
From: coco at maltedmedia.com
Sent: August 4, 2020 9:31 AM
To: coco at maltedmedia.com
Reply to: coco at maltedmedia.com
Cc: yell0w_lantern at yahoo.com
Subject: Re: [Coco] CoCoSDC on TANO Dragon

Could I please get a copy to that link as well? I also have a very early SDC.

    On Tuesday, August 4, 2020, 9:27:49 AM EDT, Alex Evans <varmfskii at gmail.com> wrote:

 That would be great, thanks.

On Tue, Aug 4, 2020, 09:26 rietveld rietveld <rietveldh at hotmail.com> wrote:

> Ok    np    i have patched the normal SDC updater to flash dosplus 5.0
> instead of SDC dos      i can send you a link to it as soon as i put it in
> my drop box tonight
>
> Sent from my BlackBerry — the most secure mobile device
> From: varmfskii at gmail.com
> Sent: August 4, 2020 9:23 AM
> To: coco at maltedmedia.com
> Reply to: coco at maltedmedia.com
> Subject: Re: [Coco] CoCoSDC on TANO Dragon
>
> My SDC is one of the very earliest. It definitely does not have anything
> other than SDC-DOS and standard DECB on it.
>
> On Tue, Aug 4, 2020, 09:13 rietveld rietveld <rietveldh at hotmail.com>
> wrote:
>
> > If your sdc is less then a few years old it will already have DOSPLUS 5
> on
> > it.  you just need to add the boot spacebar program to the autoexec file
> >
> > https://youtu.be/sj1X0g494vA
> >
> >
> > Sent from my BlackBerry — the most secure mobile device
> > From: varmfskii at gmail.com
> > Sent: August 4, 2020 8:50 AM
> > To: coco at maltedmedia.com
> > Reply to: coco at maltedmedia.com
> > Subject: Re: [Coco] CoCoSDC on TANO Dragon
> >
> > So, I need to put the raw bin from someplace like colorcomputerarchive,,
> > write a program to put it into memory, use the sdc-doc commands to write
> it
> > to one of the banks on the sdc, then set the jumpers and I should be
> good?
> >
> > On Tue, Aug 4, 2020, 06:02 rietveld rietveld <rietveldh at hotmail.com
> > <mailto:rietveldh at hotmail.com>> wrote:
> >
> > > You need to move both jumpers .    also if you are using an older SDC
> > then
> > > you should upgrade the rom to DOSPLUS 5.0.    when You run 5.0 you can
> > > autostart SDCX
> > >
> > >
> > > SDC jumper settings for a Tano Dragon
> https://imgur.com/gallery/YedO8GD
> > >
> > >
> >
> > --
> > Coco mailing list
> > Coco at maltedmedia.com<mailto:Coco at maltedmedia.com>
> > https://pairlist5.pair.net/mailman/listinfo/coco
> >
> > --
> > Coco mailing list
> > Coco at maltedmedia.com
> > https://pairlist5.pair.net/mailman/listinfo/coco
> >
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>

--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco


--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco