[Coco] need help with SCSI drives on CoCo3

David Gettle david17361 at gmail.com
Mon Apr 13 19:51:30 EDT 2020


OK, I'll be putting it in the mail this week... The tests you told me to
try both failed.

On Fri, Apr 10, 2020 at 3:28 PM Mark Marlette <mmarlette at frontiernet.net>
wrote:

> David,
>
> You can send it in and I'll check it out.
>
> Cloud-9
> 3749 County Road 30 SE
> Delano, MN 55328
>
> Regards,
>
> Mark Marlette
> http://www.cloud9tech.com
> mark at cloud9tech.com
> mark at gamecamaddict.com
>
>
>
>
>
>
> On Friday, April 10, 2020, 01:43:51 PM CDT, David Gettle <
> david17361 at gmail.com> wrote:
>
>
>
>
>
> Mark, so I assume that if this does indicate the TC^3 is not working I
> should sent it back to Cloud9 for repair, or since you were doing repairs
> for Cloud9 at one time should I send it to you?
>
> On Thu, Apr 9, 2020 at 5:08 PM Mark Marlette <mmarlette at frontiernet.net>
> wrote:
>
> > David,
> >
> > You can try other versions, but that is how a SCSI drive is addressed on
> > the bus. So either the drive is bad, which I doubt as you say /s6 is
> doing
> > the same...
> >
> > Could try &H40 instead of 1 and put /s6 on the SCSI bus.
> >
> > So...
> >
> > POKE &HFF74, &H40
> > POKE &HFF75,0
> >
> > With disk in zip drive of course otherwise you won't get a spin up and
> > drive ready.
> >
> > Regards,
> >
> > Mark Marlette
> > http://www.cloud9tech.com
> > mark at cloud9tech.com
> > mark at gamecamaddict.com
> >
> >
> >
> >
> >
> >
> > On Thursday, April 9, 2020, 03:17:08 PM CDT, David Gettle <
> > david17361 at gmail.com> wrote:
> >
> >
> >
> >
> >
> > Mark, it failed the test you suggested.
> >
> > Gene, thanks. Before I try sending the TC^3 out for repair I'll try older
> > versions of Superdriver, I have an old 6809 version, and a older 6309
> > version as well.
> >
> > Guys, I'm not using HDBDOS at all to access the TC^3,  I haven't used
> DECB
> > or HDBDOS in years, and the SCSI drive I'm trying to recover files from
> is
> > not partitioned for HDBDOS, so I would have no reason to access it that
> way
> > under normal conditions. I'm using the drivers that are in the Nitros9
> > level2 6309 version 03.03.00 that were on the DW virtual disk. I've been
> > running basic under RSB, or writing things in Basic09 or C
> >
> >
> >
> > >
> >
> > --
> > Coco mailing list
> > Coco at maltedmedia.com
> > https://pairlist5.pair.net/mailman/listinfo/coco
> >
> > --
> > Coco mailing list
> > Coco at maltedmedia.com
> > https://pairlist5.pair.net/mailman/listinfo/coco
>
> >
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>


More information about the Coco mailing list