[Coco] Nitros9 EOU

[L. Curtis Boyle]

Cool, Bill… I know a few others have started/attempted this (I even delved into it briefly back in the day), but it’s something that really needs to be done. You should check with Bill Pierce, because I think he had started one for use over drivewire. Is your utility going to be on a modern OS, or running from with NitrOS-9 itself (or both)?

L. Curtis Boyle
curtisboyle at sasktel.net



> On Sep 3, 2018, at 9:38 PM, Bill Nobel <b_nobel at hotmail.com> wrote:
> 
> Hey Alex, Yes at the moment it’s only SDC & emulators.  I am currently acquiring a list of hardware for all Coco3’s.  I am going to make a EOU Boot editor that is hopefully easy to use.  You pick the hardware you have from a list and the program builds a boot for you.
> 
> Bill Nobel
> b_nobel at hotmail.com<mailto:b_nobel at hotmail.com>
> 
> 
> 
> On Sep 3, 2018, at 6:15 PM, coco at jechar.ca<mailto:coco at jechar.ca> wrote:
> 
> 
> Is CocoSDC an absolute requirement, I have a 2Meg Coco3 and a SuperIDE
> Hard Drive. I have been able to use the Drive Wire Boot version of
> Nitros 3.03 with my system. Is Nitros9 EOU a new Kernel and if so is
> a boot from Drive Wire Version planed or is it just some new modules
> and programs and configuration files that I could tack onto my existing
> system.
> 
> On 2018-09-02 14:05, Alex Evans wrote:
> I figured out my problem was that my FTP client defaults to active mode.
> Switching to passive mode solved the problem.
> On Sun, Sep 2, 2018, 11:48 L. Curtis Boyle <curtisboyle at sasktel.net<mailto:curtisboyle at sasktel.net>> wrote:
> I have had a couple of reports of trouble accessing it (and others have
> had no problem). I will make a webpage download version later this week,
> that will hopefully let people get it that way as well (although that will
> only have the latest version, not the older ones for regression testing).
> If your email can handle large attachments (being gmail I am pretty sure
> it can), I can email it to you in the meantime. Did you want the 6809 or
> 6309 version?
> L. Curtis Boyle
> curtisboyle at sasktel.net<mailto:curtisboyle at sasktel.net>
>> On Sep 2, 2018, at 11:16 AM, Alex Evans <varmfskii at gmail.com> wrote:
>> 
>> I tried to access your ftp server, but after successfully logging in,
> commands generally return an error "500 I won't open a connection to <my
> local address> (only to <my wan address>)" apparently there is a problem
> caused by nat.
> 
> --
> Coco mailing list
> Coco at maltedmedia.com<mailto:Coco at maltedmedia.com>
> https://pairlist5.pair.net/mailman/listinfo/coco
> 
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>