[Coco] ovcc update

[Walter Zambotti]

-----Original Message-----
From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of rietveld rietveld
Sent: Thursday, 29 November 2018 10:24 AM
To: Walter Zambotti <coco at maltedmedia.com>
Subject: Re: [Coco] ovcc update

>If you BOOT up to the SLOT with the harddisk.dll and an empty.vhd in HD drive 0 >the emulator will start up with a ROM of a modified RGBDOS copyright 2002 If >you BOOT with ‎CoCoSDC_VHD.VHD the emulator will start up using HDB-DOS >1.4 SDC

>I use VCC on my coco3 on a stick to autoboot to the CocoSDC_VHD image

I'm not trying to use the harddisk.dll. I'm trying to use the superide.dll!

I normally use harddisk and I know how that works but I'm trying to test superide.

Walter

  Original Message
From: Walter Zambotti
Sent: Wednesday, November 28, 2018 8:51 PM
To: 'CoCoList for Color Computer Enthusiasts'
Reply To: CoCoList for Color Computer Enthusiasts
Subject: Re: [Coco] ovcc update


>Hello Walter.
>When you boot the emulator with the SuperIDE module, it should give you the >"Hard Disk Basic" prompt.
>Then, you should be able to access the hard drive as if you had multiple floppy >disk drives. Try DIR 100 or DSKINI 50.
>You can also use the "DRIVE OFF" and "DRIVE ON" commands to choose >whether drives 1 to 4 will be in the Hard drive of the Floppy disk drive.

>Thanks for your work,

>Diego

What ROM does it use?

Also will it work with the usual vhd disk images or do I need something different?

Walter


--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco

--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco