[Coco] Problems with Nitro Daily Build in Vcc and Windows10

[coco at jechar.ca]

My attempts to download Vcc 2.0.2b Coco 3 6809 Starter Kit setup.exe
at that link result in geting only Vcc 2.0.2b Coco 3 6809 Starter Kit 
setup.exe.part with only about 3/4 of the specified file size same 
problem with the 6309 file. Maybe there is a problem on the dabarnstudio 
site.


On 2018-06-28 18:51, Bill Pierce via Coco wrote:
> To save you a lot of setup hassle, just get the VCC starter kit. If
> so, please read the text file that comes with it. It also displays
> during the install
> 
> https://sites.google.com/site/dabarnstudio/the-color-computer-drivewire4-hdbdos-nitros9-starter-kit
> 
> 
> 
> 
> 
> Bill Pierce
> "Charlie stole the handle, and the train it won't stop going, no way
> to slow down!" - Ian Anderson - Jethro Tull
> 
> My Music from the Tandy/Radio Shack Color Computer 2 & 3
> https://sites.google.com/site/dabarnstudio/
> Co-Contributor, Co-Editor for CocoPedia
> http://www.cocopedia.com/wiki/index.php/Main_Page
> 
> E-Mail: ooogalapasooo at aol.com
> 
> 
> 
> 
> 
> -----Original Message-----
> From: coco <coco at jechar.ca>
> To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
> Sent: Thu, Jun 28, 2018 6:15 pm
> Subject: Re: [Coco] Problems with Nitro Daily Build in Vcc and 
> Windows10
> 
> Where Do I download this kwikgen ?On 2018-06-27 14:09, David Ladd
> wrote:> You only need to use the Becker disk images if you want to
> boot from> DriveWire server.  Otherwise you can use kwikgen to edit
> the OS9Boot > file> and add in the required modules to use DriveWire.
> Then add in the > optional> modules depending on the features you plan
> on using.> >
> +-----------------------------------------------------------------------+>
> | David Ladd a.k.a. PacoOtaktay a.k.a. Drencor
>  > |> | YouTube: http://www.youtube.com/user/PacoOtaktay
>        > |> | YouTube Gaming Live:
> https://gaming.youtube.com/user/PacoOtaktay/live > |> | Websites:
> http://dwladd.com     &     http://www.theterrorzone.com    > |> | G+:
>  https://plus.google.com/113262444659438038657                    > |>
> | G+:  https://plus.google.com/+DavidLaddPacoOtaktay
>  > |> |   > |> | Do you have your CoCo 3 yet?
>                 > |>
> +-----------------------------------------------------------------------+>
> > > On Wed, Jun 27, 2018 at 12:56 PM, <coco at jechar.ca> wrote:> >> In Vcc to use a drivewire disk do you need to boot from a BECKER image >> ?>> >> >> On 2018-06-27 13:50, David Ladd wrote:>> >>> The Becker disk images are to be mounted in DriveWire and then you >>> use the>>> CoCo3FPGA, VCC, MAME, or XROAR to boot via a TCP connection between >>> the>>> emulator and the DriveWire server.>>> >>> +-----------------------------------------------------------------------+>>> | David Ladd a.k.a. PacoOtaktay a.k.a. Drencor                        >>>   |>>> | YouTube: http://www.youtube.com/user/PacoOtaktay                    >>>   |>>> | YouTube Gaming Live: >>> https://gaming.youtube.com/user/PacoOtaktay/live |>>> | Websites: http://dwladd.com     &     http://www.theterrorzone.com  >>>   |>>> | G+:  https://plus.google.com/113262444659438038657                  >>>   |>>> | G+:  https://plus.google.com/+DavidLaddPacoOtaktay                  >>>   |>>> |                                  
                                  >>>   |>>> | Do you have your CoCo 3 yet?                                        >>> |>>> +-----------------------------------------------------------------------+>>> >>> >>> On Wed, Jun 27, 2018 at 7:54 AM, <coco at jechar.ca> wrote:>>> >>> Sorry Bill, your reply was helpful.>>>> >>>> My mistake was to think that the BECKER disks were the ones for the >>>> Vcc>>>> Emulator, apparently just the standard coco floppy images are whats>>>> needed,>>>> I don't understand what the BECKER disks are for if they will not >>>> boot>>>> under Vcc then how can one do Drivewire with TCP/IP ?>>>> >>>> If they were supposed to boot under Vcc then you have a bug >>>> otherwise>>>> it's>>>> my understanding that's lacking. I have used drivewire quite a bit >>>> but>>>> always with  a real coco attached through it's Bit Banger to a pc or >>>> pi.>>>> >>>> >>>> >>>> On 2018-06-25 11:43, Bill Pierce via Coco wrote:>>>> >>>> Without knowing how your VCC is setup AND what
disk you're using,>>>>> there's no way of knowing what your problem is.>>>>> Give a list of CPU, drives, drivewire, etc, etc and the FULL name >>>>> of>>>>> the disk you're trying and how you are booting (where the disk is>>>>> mounted, cmds used, etc)>>>>> >>>>> >>>>> >>>>> >>>>> >>>>> Bill Pierce>>>>> "Charlie stole the handle, and the train it won't stop going, no >>>>> way>>>>> to slow down!" - Ian Anderson - Jethro Tull>>>>> >>>>> My Music from the Tandy/Radio Shack Color Computer 2 & 3>>>>> https://sites.google.com/site/dabarnstudio/>>>>> Co-Contributor, Co-Editor for CocoPedia>>>>> http://www.cocopedia.com/wiki/index.php/Main_Page>>>>> >>>>> E-Mail: ooogalapasooo at aol.com>>>>> >>>>> >>>>> >>>>> >>>>> >>>>> -----Original Message----->>>>> From: coco <coco at jechar.ca>>>>>> To: Coco List <coco at maltedmedia.com>>>>>> Cc: Coco List <coco at maltedmedia.com>>>>>> Sent: Mon, Jun 25, 2018 9:06 am>>>>> Subject: [Coco] Problems with Nitro Daily Build in Vcc and >>>>> Windows10>>>>> >>>>>  
The Arcade pack boots but Nitro dsk will not.-- Coco mailing>>>>> listCoco at maltedmedia.comhttps://pairlist5.pair.net/mailman/l>>>>> istinfo/coco>>>>> >>>>> >>>> -->>>> Coco mailing list>>>> Coco at maltedmedia.com>>>> https://pairlist5.pair.net/mailman/listinfo/coco>>>> >>>> >> -->> Coco mailing list>> Coco at maltedmedia.com>> https://pairlist5.pair.net/mailman/listinfo/coco>> -- Coco mailing listCoco at maltedmedia.comhttps://pairlist5.pair.net/mailman/listinfo/coco