[Coco] Vcc - Drivewire4 How to??

[coco at jechar.ca]

  Ok It is sort of working but Totaly useless.

  It does not see the drives I mount.

  When I select disk in memory for drive 4 and then do a DSKINI 4
  It formats drive 0 rather then drive 4 like it's supposed to F* UP!

On 2018-07-04 15:56, coco at jechar.ca wrote:
> I will give it a try but I am not sure how applicable it will be as it
> deals with Vcc 1.43 and
>  I have Vcc 2.01.
> 
> On 2018-07-04 15:28, Michael Furman wrote:
>> Yes, if you are using vcc there is some configuration that is
>> involved.  This wiki should help.  The wiki is long but it’s really
>> because the wiki really attempts to be a step-by-step guide and has  a
>> lot of descriptive text to help you understand the steps.  Let us know
>> if you still get stuck somewhere along the way.
>> 
>> http://www.cocopedia.com/wiki/index.php/VCC_1.4.3b_and_DW4_Installation_Guide
>> 
>> Sent from my iPhone
>> 
>>> On Jul 4, 2018, at 11:00, coco at jechar.ca wrote:
>>> 
>>> 
>>> OK I tryed mounting NOS9_6309_L2_v030300_coco3_becker.dsk in 0 on 
>>> Drivewire4
>>> 
>>> Running the Wizard specifying Emulator TCP/IP
>>> 
>>> Starting Vcc
>>> 
>>> Seting Multipack to Drivewire Slot // Hard Reset // DOS
>>> 
>>> Does not work, in fact it does not even see a Drive.
>>> 
>>> Have tried this on two systems
>>> 
>>>  A. Windows 7 System runing in Virtual Box under Ubuntu.
>>>  B. A standard native Windows 10 system.
>>> 
>>> What am I missing.
>>> 
>>> Vcc 2.01 runs fine for floppy images.
>>> 
>>> Do I need a special ROM ?
>>> 
>>> 
>>> --
>>> Coco mailing list
>>> Coco at maltedmedia.com
>>> https://pairlist5.pair.net/mailman/listinfo/coco