[Coco] CoCoSDC

[rietveld rietveld]

That's what I use.

Put the. Dsk and. Cfg files on the root of the card.
   This will make the sdc autoboot to the sdc explorer
Sent from my BlackBerry Passport Red Edition.
  Original Message
From: Randall Kindig
Sent: Sunday, November 19, 2017 2:33 PM
To: CoCoList for Color Computer Enthusiasts
Reply To: CoCoList for Color Computer Enthusiasts
Subject: Re: [Coco] CoCoSDC


It’s an 8GB microSD in an SD adapter.

I formatted it with no issues to FAT32.


> On Nov 19, 2017, at 1:23 PM, rietveld rietveld <rietveldh at hotmail.com> wrote:
>
> As a side note, what size is your SD card?   There are problems formating to FAT on smaller and very large cards
>
> Sent from my BlackBerry Passport Red Edition.
>  Original Message
> From: rietveld rietveld
> Sent: Sunday, November 19, 2017 1:18 PM
> To: Randy Kindig
> Reply To: CoCoList for Color Computer Enthusiasts
> Subject: Re: [Coco] CoCoSDC
>
>
> I just sent u a zip of SDCX.
>
> Unzip this and install to the root of the SD card.
> When u turn on your coco the SDC will auto boot the SDC explorer menu.   This should display every DIR and. Dsk on the SD card
>
> Sent from my BlackBerry Passport Red Edition.
>  Original Message
> From: Randy Kindig
> Sent: Sunday, November 19, 2017 1:14 PM
> To: CoCoList for Color Computer Enthusiasts
> Reply To: CoCoList for Color Computer Enthusiasts
> Subject: Re: [Coco] CoCoSDC
>
>
> These disk images are at the root directory
>
> Sent from my iPhone
>
>> On Nov 19, 2017, at 1:07 PM, rietveld rietveld <rietveldh at hotmail.com> wrote:
>>
>> Are the directories 8 characters or less? You need to use the 8 and 3 rule the same way u would on a real disk.   xxxxxxxx.xxx
>>
>>
>> Sent from my BlackBerry Passport Red Edition.
>> Original Message
>> From: Randall Kindig
>> Sent: Sunday, November 19, 2017 12:38 PM
>> To: CoCoList for Color Computer Enthusiasts
>> Reply To: CoCoList for Color Computer Enthusiasts
>> Subject: [Coco] CoCoSDC
>>
>>
>> Ok, guys, I apologize up front.  I’m probably an idiot.
>>
>> I’m using my CocoSDC for the very first time.  I created an SD card with various .DSK images on it.  I have the CocoSDC manual so wonderfully provided by members of this group (much appreciated!)  However, every DSK image I load up (using the DRIVE command), and then use the DIR command shows an empty directory.
>>
>> Who can be the first one to tell me what stupid thing I’m doing or not doing? :)
>>
>> I can’t even update the firmware and SDC DOS on this because I can’t run the setup program as a result.
>>
>> thanks
>>
>> Randy
>>
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> https://pairlist5.pair.net/mailman/listinfo/coco
>>
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> https://pairlist5.pair.net/mailman/listinfo/coco
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco


--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco