[Coco] CLOAD on coco1 vs CLOAD on coco3

[Glen Hewlett]

Hi Henry,

It could be there your basic program is doing a RAM test and since the CoCo 3 is always in RAM mode above 32k, the program is getting confused.  If I remember correctly, I think there is a way to get the CoCo3 back to RAM/ROM mode to act more like a CoCo1/2.  If someone here remembers how you can try that and see if it fixes your CoCo 3 loading problem.  Or check the program and see if it is detecting the RAM size and force it to be 32k like your CoCo 1.

Cheers,
Glen

> On Nov 9, 2017, at 8:06 PM, rietveld rietveld <rietveldh at hotmail.com> wrote:
> 
> The ML server is moving to 32027.   So it's occupies space between 32027 and 32767 on my coco1 (32k).
> 
> And loads to 15643 on my 16k coco 2.   (15643-16383)
> 
> I just assumed that it would load to the top of the 512k and not interfere. I am not sure how the coco3 memory map works?
> 
> Sent from my BlackBerry Passport Red Edition.
>  Original Message
> From: Bill Pierce via Coco
> Sent: Thursday, November 9, 2017 7:43 PM
> To: coco at maltedmedia.com
> Reply To: CoCoList for Color Computer Enthusiasts
> Cc: Bill Pierce
> Subject: Re: [Coco] CLOAD on coco1 vs CLOAD on coco3
> 
> 
> Henry, CLOAD is not the problem. It runs the same. The problem is the program is copying to hi ram. The Coco 3 runs in all ram mode and the program is probably overwriting SECB, therefore crashing everything
> 
> 
> 
> 
> 
> Bill Pierce
> "Charlie stole the handle, and the train it won't stop going, no way to slow down!" - Ian Anderson - Jethro Tull
> 
> My Music from the Tandy/Radio Shack Color Computer 2 & 3
> https://sites.google.com/site/dabarnstudio/
> Co-Contributor, Co-Editor for CocoPedia
> http://www.cocopedia.com/wiki/index.php/Main_Page
> 
> E-Mail: ooogalapasooo at aol.com
> 
> 
> 
> 
> 
> -----Original Message-----
> From: rietveld rietveld <rietveldh at hotmail.com>
> To: Coco mailing list <coco at maltedmedia.com>
> Sent: Thu, Nov 9, 2017 7:36 pm
> Subject: [Coco] CLOAD on coco1 vs CLOAD on coco3
> 
> Is the CLOAD routine handled differently on the coco3 ?
> 
> I have a BASIC program on tape that has ML appended to the end of it.
> 
> When I CLOAD the  BASIC program it also loads the ML and moves it to the top of the RAM on my coco 1
> 
> This does not seem to be working on my coco3
> 
> 
> 
> Sent from my BlackBerry Passport Red Edition.
> 
> -- Coco mailing listCoco at maltedmedia.comhttps://pairlist5.pair.net/mailman/listinfo/coco
> 
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco