[Coco] Cartridges that use SCS decoding

[Zippster]

Good point Jim.  I do something similar with the PSG.

There is a bit in the control register (SCS space), that software must explicitly
set to enable writes to CTS space and enable SLENB.

- Ed


> On Mar 9, 2017, at 12:53 PM, RETRO Innovations <go4retro at go4retro.com> wrote:
> 
> On 3/9/2017 12:44 PM, Zippster wrote:
>> You can use SLENB.
> I would add that you need to a way to decode the writes.  Since CTS will not be driven, you'll need to construct a pseudo-CTS signal, and you'll need to guard against doing so simplistically, since a wrote the $c000 could be for the external EEPROM/RAM/FLASH, or it could be for the internal RAM.  I use a flag in SCS space to denote writes are allowed in FLASH space.
> 
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco