[Coco] XRoar and Drivewire

[Peter Cetinski]

Thanks, Bill.  I’ve got it working now.  The key was to build the hdbdw3bck.rom in toolshed and setup the conf file correctly with the becker settings.

> On Mar 5, 2017, at 11:21 PM, Bill Pierce via Coco <coco at maltedmedia.com> wrote:
> 
> First, if you are using Windows, the menu system in XRoar is still a little flaky. The machine does not seem to change under the machine menu, nor does it seem to display the proper machine loaded. I normally run a Coco2 (NTSC), with the T1 vdg, and hdbdos. The Menu shows me running a PAL Coco2.
> 2nd, disc extended basic will not run drivewire, you must have the hdbdos rom (as stated in the xroar manual), and that is why decb is not loading, it is looking for hdbdos.
> Now, if you read the manual.....
> Everything is set in the "xroar.conf" file. Or you can do the same from the cmd line (slightly different syntax).
> 
> My "xroar.conf" to run a Coco2, with T1 vdg, 64k, and hdbdos for DW4 is:
> 
> ram 64k
> machine cocous
> vdg-type 6847t1
> joy-right mjoy0
> becker
> becker-ip 127.0.0.1
> becker-port 65504
> 
> When specifying "becker-port, XRoar will automatically look for the "hdbdw3bck.rom" in the same place you have the other roms.
> This should get you up and running.
> 
> 
> 
> 
> 
> 
> Bill Pierce
> "Charlie stole the handle, and the train it won't stop going, no way to slow down!" - Ian Anderson - Jethro Tull
> 
> 
> 
> My Music from the Tandy/Radio Shack Color Computer 2 & 3
> https://sites.google.com/site/dabarnstudio/
> Co-Contributor, Co-Editor for CocoPedia
> http://www.cocopedia.com/wiki/index.php/Main_Page
> Global Moderator for TRS-80/Tandy Color Computer Forums
> http://www.tandycoco.com/forum/
> 
> E-Mail: ooogalapasooo at aol.com
> 
> 
> 
> 
> 
> 
> -----Original Message-----
> From: Peter Cetinski <pete at pski.net>
> To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
> Sent: Sun, Mar 5, 2017 9:11 pm
> Subject: [Coco] XRoar and Drivewire
> 
> I’m trying to get XRoar to communicate with a local Drivewire server via the becker port.  When I select to use the "RS-DOS with becker port" from the XRoar Cartridge menu, it does not load Disk Extended Basic, only Extended Color Basic. So, how can I load the DW dos bin file on the emulated Coco?  Any hints for getting this setup working?ThanksPete-- Coco mailing listCoco at maltedmedia.comhttps://pairlist5.pair.net/mailman/listinfo/coco
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco