[Coco] 3d printed ROM pak case

[Glen Hewlett]

Hi again Scott,

I imported the program pk case bottom stl into Simplify 3D and it detected it was in inches format and asked if I wanted to import it as millimetre format.  I said yes and it auto scaled it by 2540, sorry my previous email had the wrong scale factor.

So the size in mm’s should be:
X 107.95, Y 76.20 & Z 16.51

Cheers,
Glen

> On Jul 26, 2017, at 9:55 PM, Scott Wendt <malfunct at msn.com> wrote:
> 
> Huh, these files load up super tiny in my 3d print software. I need to figure out why.
> 
> ________________________________
> From: Coco <coco-bounces at maltedmedia.com> on behalf of Scott Wendt <malfunct at msn.com>
> Sent: Wednesday, July 26, 2017 12:21:30 PM
> To: CoCoList for Color Computer Enthusiasts
> Subject: Re: [Coco] 3d printed ROM pak case
> 
> That is awesome, I'll look deeper when I get home from work.
> 
> ________________________________
> From: Coco <coco-bounces at maltedmedia.com> on behalf of Mark J. Blair <nf6x at nf6x.net>
> Sent: Wednesday, July 26, 2017 8:47:48 AM
> To: CoCoList Computer Enthusiasts
> Subject: Re: [Coco] 3d printed ROM pak case
> 
> In case it helps, here is the CAD model that I created from one of my small-board cases. I tried to get as close to the original shape as I could, with the most notable deviation being that I couldn't figure out how to reproduce some of the fillet blends on the finger notches.
> 
> https://github.com/NF6X/CoCoProgramPakCases
> 
> --
> Mark J. Blair, NF6X <nf6x at nf6x.net>
> http://www.nf6x.net/
> 
> 
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
> 
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco