[Coco] 3 1/2 drive on coco and drive 0-3 on one ribbon cable
Rietveld Rietveld
rietveldh at hotmail.com
Thu Aug 31 16:13:53 EDT 2017
Thank you for the fast response. Both Arthur and Barry.
I seldom use OS9 since most of the programs I use run under DECB.
Is ADOS the preferred way to treat drive 0 and 1 as drive 0/1 and 2/3 with my FD502?
If so ' since I don't have a way to burn a new ROM, is there a way to have my SDC auto EXEC ADOS instead of the explorer?
Sent from my BlackBerry Passport Red Edition.
Original Message
From: Arthur Flexser
Sent: Thursday, August 31, 2017 3:54 PM
To: CoCoList for Color Computer Enthusiasts
Reply To: CoCoList for Color Computer Enthusiasts
Subject: Re: [Coco] 3 1/2 drive on coco and drive 0-3 on one ribbon cable
1. DECB will only format the first 35 tracks of the drive unless patched.
ADOS-3 (and perhaps some other modified DECBs) has such a patch, but after
formatting 80 tracks under ADOS-3, you still wouldn't be able to access the
upper tracks except under such a modified DOS, or under OS-9. If you wrote
to such a disk under standard DECB, it would wipe out the portion of the
GAT devoted to the upper tracks and make the disk partially unreadable even
if you went back to a modified DECB.
2. I think 4 physical drives as you describe would be recognized under
DECB, but you'd only have access to each one as 35-track single-sided
without a modified DECB or OS-9.
Art
On Thu, Aug 31, 2017 at 3:00 PM, Rietveld Rietveld <rietveldh at hotmail.com>
wrote:
> Two questions pls:
>
> I replaced my 5 1/4 drive 1 with a 720k 3 1/2. When I do a DIR 1 it
> reads the drive, but when I DSKINI 1 it will only format the disk to 158k.
> Will DECB format the full 720k?
>
> Question two
>
> I want to hook up this dual drive FD502 inline with another FD502 and dual
> drive to have three physical 5 1/4 drives and one 3 1/2 drive.
>
> If I replace both ribbon cables with one from cloud nine that has a card
> conector on one end for the controller and for connectors on the other end
> for the four physical drives will the one FD502 controller and the coco
> recognize this setup as drive 0-3
>
> Thanks
>
>
> Sent from my BlackBerry Passport Red Edition.
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>
--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco
More information about the Coco
mailing list