[Coco] Troubleshooting CoCo 3
Salvador Garcia
salvadorgarciav at yahoo.com
Sat Apr 29 16:58:06 EDT 2017
Thanks Chris! I'll have a second look. Salvador
From: Christopher R. Hawks <chawks at dls.net>
To: coco at maltedmedia.com
Sent: Saturday, April 29, 2017 1:48 PM
Subject: Re: [Coco] Troubleshooting CoCo 3
On Sat, 29 Apr 2017 17:39:34 +0000 (UTC)
Salvador Garcia via Coco <coco at maltedmedia.com> wrote:
> Hi all,
> I finally got to start troubleshooting the CoCo 3 that HRietveld gave
> me. He suspected the power supply, so I started by following the
> flowchart that's on page 58 of the CoCo 3 tech manual. Almost
> everything checked out ok: 5v at tp1-13 at IC8 pin 15 I was not able
> to check the 8vdc at the output of IC36 because I was not able to
> locate any ICx larger than 19. The CoCo came with 128K, but caps 65
> and 66 were snipped, so I assumed that the previous owner at some
> time had a Triad 512K RAM expansion or similar product that required
> these caps to be snipped. For testing I pulled the 128K and left the
> CoCo 3 "RAMless". What sort of screen image should I get if I power
> up a RAMless CoCo 3? If I pull the keyboard Mylar, what would the
> image on the screen look like? Currently I am getting a "black"
> screen on power up. Thanks! Salvador PS: Full disclosure. The only
> tool I have (besides screw drivers and a soldering iron) is a
> multimeter..
>
Salvador:
IC36 is the 8 volt regulator near the RF Modulator on the
schematic. (Right under the word SCHEMATIC in fact.)
Christopher R. Hawks
HAWKSoft
--
To gain the friendship of a cat is not an easy thing. It is...a
creature of habit and a lover of order and cleanliness. It will
consent to be your friend if you are worthy of the honor, but it will
not be your slave. -- Theophile Gautier
----------------------------------------
\ ^__^
\ (oo)\_______
(__)\ )\/\
||----w |
|| ||
--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco
More information about the Coco
mailing list