[Coco] CoCo3 FPGA project analog boards

[Zippster]

Another update…

I’ve been able to test the joystick circuits, the additional serial port, and now thanks to
Dave Philipsen, the SRAM.  Thank you Dave, that really helps put my mind at ease.

It all looks good and we are a go, so the board order has been placed.

All the other components have been received or are on their way except the SRAMs
and the AD chips, which I’ll get ordered this weekend.

The new top plates are in from Tim Linder.  Thank you for your help on this Tim, very appreciated.  :)

I should be building these starting in about one week.

<https://drive.google.com/open?id=0B1sgl615FlGnWnQwRlJQOG1oYXc <https://drive.google.com/open?id=0B1sgl615FlGnWnQwRlJQOG1oYXc>>

- Ed


> On May 16, 2016, at 9:59 PM, Zippster <zippster278 at gmail.com> wrote:
> 
> Hi guys,
> 
> A little update.
> 
> I built one of the test boards tonight, so I should be able to get this tested over the next day
> or two, get a few small tweaks (positioning of the WiFi module mostly), and then get the
> run ordered.  They are taking about 1 week to get to me right now, so I should be able to start
> shipping boards in about 2 weeks or so assuming everything goes ok.
> 
> Tim Linder has offered to help me with getting some new top plates cut for our CoCo3 FPGAs.
> 
> Here's a pic of the sample top plate.  This should help tie everything into a finished looking package.
> New top plates along with a standoff kit will be included with the boards.
> 
> Pics…
> <https://drive.google.com/open?id=0B1sgl615FlGnX01MOEFSMnpXME0 <https://drive.google.com/open?id=0B1sgl615FlGnX01MOEFSMnpXME0>>
> <https://drive.google.com/open?id=0B1sgl615FlGnWVhBbFpEOGIwOFE <https://drive.google.com/open?id=0B1sgl615FlGnWVhBbFpEOGIwOFE>>
> 
> Sorry this is taking so long, but hopefully the results will be worth it.   :)
> 
> - Ed
> 
> 
>> On May 11, 2016, at 9:54 AM, Salvador Garcia via Coco <coco at maltedmedia.com <mailto:coco at maltedmedia.com>> wrote:
>> 
>> 
>> Looks and feels just right!!!  
>> Salvador
>> 
>> 
>