[Coco] Fwd: IP packets on my coco

[Jason M]

Hello.

Where did this thread end up going ? Are folks working on this ?
On Jun 14, 2016 11:31 PM, "Camillus" <camillus.b.58 at gmail.com> wrote:

> would the programmer that I use for ALTERA devices work?
> I Think its a byteblaster II
> cb
>
> Sent from Mailbird [
> http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird
> ]
> On 6/12/2016 7:14:45 AM, Zippster <zippster278 at gmail.com> wrote:
> Camillus,
>
> I’d recommend the Xilinx XC9500XL series for interfacing with retro
> computer projects.
> They are AFAIK the only 5v tolerant CPLDs still in manufacture. This way
> you can avoid
> the need for level shifting (they are also a good option as a level
> shifter BTW).
>
> To get started, you’ll want to download and install the Xilinx ISE Webpack…
> >
>
> If you are not familiar with Verilog or VHDL, you can use a schematic to
> enter your design.
> You’ll want to study the Xilinx unified libraries for CPLDs …
> >
>
> And of course the data sheet for the family…
> >
>
> You’ll need a suitable programmer as well.
>
> There are forums on the Xilinx website that may be helpful, and you can
> email me as well.
>
> There’s a bit of a learning curve at first, but they are quite easy to
> use/design with
> once you get familiar with the ISE environment.
>
> Good luck… :)
>
> - Ed
>
>
> > On Jun 11, 2016, at 11:02 PM, Camillus wrote:
> >
> > Any good leads for info, tutorials, books about CPLD's and programming
> those black boxes?
> >
> > thnx again
> >
> > cb
> >
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>