[Coco] MPI Updates

[RETRO Innovations]

   Yep, I will have a working version by CocoFest (need to reserve my
   room...)

   The only issue I see with the current solution:

     * The SND line.  The digital data is bleeding over onto the SND line,
       and I have tried to minimize it, to no avail.  Suggestions for help
       there are appreciated.  I have tried cutting the traces on the PCB
       and routing the line separately, but it's not making much of a
       difference (I thought maybe I should use a separate line for the
       SND data).
     * On an 8 pos unit, if such a thing is marketed, the slide switch
       only handles selecting the bottom 4 slots.  I *might* be able to
       find an 8 pos switch, but if not, then it means only 2 slots
       (assuming most people have a CocoSDC in 3 or 4 or a SuperIDE in 3
       and a Floppy Controller in 4 can be selected from the switch.  (The
       rest can be software selected)

   Jim

     On January 29, 2016 at 10:59 AM Lee Patterson <lee at 8bitcoder.com>
     wrote:
     This looks totally exciting. Did you mention if you will have
     working versions ready for Cocofest? I think I would rather wait to
     get this unit rather then try to find a working MPI on eBay, since I
     still need one.
     Lee
     --- -- - -
     "I reject your reality, and substitute my own."
     8BitCoder.com
     >> On Jan 28, 2016, at 13:32, RETRO Innovations
     <go4retro at go4retro.com> wrote:
     >>
     >> On 1/28/2016 9:28 AM, Salvador Garcia wrote:
     >> That looks amazing! How is the CoCo connected? Is it to the MPI
     that is pictured on the bottom left? Regards, Salvador

     It is.
     Jim
     --
     Coco mailing list
     Coco at maltedmedia.com
     https://pairlist5.pair.net/mailman/listinfo/coco

     --
     Coco mailing list
     Coco at maltedmedia.com
     https://pairlist5.pair.net/mailman/listinfo/coco