[Coco] Formatting L.R. Tech Hard Drive in OS9 Level II

[Bill Pierce]

BTW... this fix will NOT put it on any disk. It will just build it in the coco3 and coco3_6309 modules folders. To put it on disk or use it in a boot (in the repo), you have to edit several more makefiles and rules.make to name it, ID it, and add it to the modules, the boot kits, and the nitros9 dir LOL

 

 


Bill Pierce
"Charlie stole the handle, and the train it won't stop going, no way to slow down!" - Ian Anderson - Jethro Tull

 

My Music from the Tandy/Radio Shack Color Computer 2 & 3
https://sites.google.com/site/dabarnstudio/
Co-Contributor, Co-Editor for CocoPedia
http://www.cocopedia.com/wiki/index.php/Main_Page
Global Moderator for TRS-80/Tandy Color Computer Forums
http://www.tandycoco.com/forum/

E-Mail: ooogalapasooo at aol.com


 

 

-----Original Message-----
From: Bill Pierce via Coco <coco at maltedmedia.com>
To: coco <coco at maltedmedia.com>
Cc: Bill Pierce <ooogalapasooo at aol.com>
Sent: Mon, Jan 11, 2016 3:08 am
Subject: Re: [Coco] Formatting L.R. Tech Hard Drive in OS9 Level II

I think you need to remove the DTC3 flag or it will see that first... the loop is an if else, so it will see the tc3, then jump over the ktlr in the llscsi.asm.  Bill Pierce"Charlie stole the handle, and the train it won't stop going, no way to slow down!" - Ian Anderson - Jethro Tull My Music from the Tandy/Radio Shack Color Computer 2 & 3https://sites.google.com/site/dabarnstudio/Co-Contributor, Co-Editor for CocoPediahttp://www.cocopedia.com/wiki/index.php/Main_PageGlobal Moderator for TRS-80/Tandy Color Computer Forumshttp://www.tandycoco.com/forum/E-Mail: ooogalapasooo at aol.com  -----Original Message-----From: Mark J. Blair <nf6x at nf6x.net>To: CoCoList Computer Enthusiasts <coco at maltedmedia.com>Sent: Mon, Jan 11, 2016 2:59 amSubject: Re: [Coco] Formatting L.R. Tech Hard Drive in OS9 Level IIEven though it appears to have been unnecessary, I'm curious about whether I built the llktlr stuff correctly. Here's how I modified level2/coco3/modules/makefile. Does it look like I hacked it correctly?...src/nitros9% hg diff level2/coco3/modules/makefilediff -r 900100ea305c level2/coco3/modules/makefile--- a/level2/coco3/modules/makefile	Tue Dec 22 21:43:23 2015 +0100+++ b/level2/coco3/modules/makefile	Sun Jan 10 23:56:32 2016 -0800@@ -16,6 +16,7 @@ CLOCKMESSEMU    = -DRTCMessEmu=1 CLOCKJVEMU      = -DRTCJVEmu=1 TC3FLAGS   = $(AFLAGS) -DTC3=1 $(FLAGS)+KTLRFLAGS        = $(AFLAGS) -DKTLR=1 $(FLAGS) IDEFLAGS        = $(AFLAGS) -DIDE=1 $(FLAGS) SDFLAGS         = $(AFLAGS) -DCOCOSDC=1 -DITTYP=128 $(FLAGS) @@ -48,7 +49,8 @@ 		ddi0_ide.dd i0_ide.dd i1_ide.dd ih_ide.dd \ 		dds0_tc3.dd s0_tc3.dd s1_tc3.dd s2_tc3.dd s3_tc3.dd s4_tc3.dd \ 		s5_tc3.dd s6_tc3.dd sh_tc3.dd \-		ddsd0_cocosdc.dd sd0_cocosdc.dd sd1_cocosdc.dd+		ddsd0_cocosdc.dd sd0_cocosdc.dd sd1_cocosdc.dd \+		llktlr.dr dds0_ktlr.dd s0_ktlr.dd s1_ktlr.dd sh_ktlr.dd  SCF		= scf.mn \ 		vtio.dr vrn.dr scbbp.dr scbbt.dr scdwp.dr sspak.dr sc6551.dr \@@ -185,6 +187,10 @@ lltc3.dr: llscsi.asm 	$(AS) $(ASOUT)$@ $< $(TC3FLAGS) +# LR Tech Driver+llktlr.dr: llscsi.asm+	$(AS) $(ASOUT)$@ $< $(KTLRFLAGS)+ # IDE Driver llide.dr: llide.asm 	$(AS) $(ASOUT)$@ $< $(IDEFLAGS)@@ -381,6 +387,19 @@ sh_tc3.dd: superdesc.asm 	$(AS) $(ASOUT)$@ $< $(TC3FLAGS) $(HDBDOS) +# LR Tech Descriptors+dds0_ktlr.dd: superdesc.asm+	$(AS) $(ASOUT)$@ $< $(KTLRFLAGS) $(ID0) -DDD=1++s0_ktlr.dd: superdesc.asm+	$(AS) $(ASOUT)$@ $< $(KTLRFLAGS) $(ID0) $(SCSI_HD)++s1_ktlr.dd: superdesc.asm+	$(AS) $(ASOUT)$@ $< $(KTLRFLAGS) $(ID1) $(SCSI_HD)++sh_ktlr.dd: superdesc.asm+	$(AS) $(ASOUT)$@ $< $(KTLRFLAGS) $(HDBDOS)+ # IDE Descriptors ddi0_ide.dd: superdesc.asm 	$(AS) $(ASOUT)$@ $< $(IDEFLAGS) $(MASTER) -DDD=1-- Coco mailing listCoco at maltedmedia.comhttps://pairlist5.pair.net/mailman/listinfo/coco-- Coco mailing listCoco at maltedmedia.comhttps://pairlist5.pair.net/mailman/listinfo/coco