[Coco] New version of SDC-DOS available

[Guillaume Major]

Thank you very much Darren for your new auto execute feature and the EXP 
command as the icing on the cake! It makes the Coco SDC and SDCX easier to 
use. It is really appreciated.

Keep up the good work!

Guillaume

"Darren A" <mechacoco at gmail.com> a écrit dans 
le message de 
news:CAE8FjTY8ZOT5Kr0NUOpUBAmrJ6tO92BW0F7KGYqUW_hES+LnGw at mail.gmail.com...
> An updated SDC-DOS version 1.3 for the CoCo-SDC is now available.
>
> Download link for latest SDCSETUP disk image:
>   <https://goo.gl/snV5Mk>
>
>
> New features in this version:
>
> Support for running an "AUTOEXEC.BAS" program at system startup.  You can
> hold down the SHIFT key to suppress this.
>
>
> A new EXP command which can be used to quickly mount and run a program 
> like
> the SDC Explorer.  Think of EXP as shorthand for Explorer or Express.  The
> EXP command is roughly equivalent to the following:
>
>  DRIVE 1,"/SDCEXP.DSK" : RUN "AUTOEXEC.BAS:1"
>
>
> The WRITE MEM command will now write to the FE00-FEFF locations in the
> flash banks when running on a CoCo 3. Likewise, the COPY MEM command now
> reads from flash for these locations on a CoCo 3.
>
>
> You can change the machine type for DriveWire communications to something
> other than the one detected by SDC-DOS at startup by entering:
>  DEF DW=n
>
> Specify 1, 2 or 3 for n according to the CoCo model whose speed capability
> you want to use:
>
>  1 =  38,400 bps
>  2 =  57,600 bps  -  requires op-amp replacement on CoCo 1
>  3 = 115,200 bps  -  allowed only on a CoCo 3
>
>
>
> - Darren
>
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>