[Coco] DE1-CocCo3FPGA-Keyboard

[Brett Gordon]

yup.. same here..no keyboard until you upgrade the fpga programming.
On Aug 17, 2016 6:45 PM, "Dave Philipsen" <dave at davebiz.com> wrote:

> Ah, that's it!  I forgot that for whatever reason the keyboard is rendered
> non-functional if you install an analog board without reprogramming the DE1
> for the analog board.
>
> Dave
>
>
> On 8/17/2016 5:37 PM, Zippster wrote:
>
>> Hi Richard,
>>
>> You are using the same programming the DE1 would have used without
>> an analog board?  The DE1 will need to be reprogrammed with Gary’s new
>> build specifically for use with the analog board if that is the case.
>>
>> Do you have software installed on a PC for programming the DE1?
>>
>> - Ed
>>
>>
>>
>>
>> On Aug 17, 2016, at 5:11 PM, Richard E. Crislip <rcrislip at neo.rr.com>
>>> wrote:
>>>
>>> Hi after letting it sit for close to a year, I tried to use my DE1
>>> CoCo3FPGA now equipped with the analog card. I am still using the
>>> original ROM imaged flashed to it by, I believe, Zippster. Switches 0,
>>> 1, 2, 4, 5, 6, & 9 are turned on, the switches are moved furthest away
>>> from me and the card edge. DECB pops up right away, but I cannot get
>>> any response my PS2 E-Machine keyboard, except for light flash
>>> immediately after power up. After that the keyboard does not work.
>>>
>>> --
>>> Coco mailing list
>>> Coco at maltedmedia.com
>>> https://pairlist5.pair.net/mailman/listinfo/coco
>>>
>>
>>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>