[Coco] I am using the 6809

[Barry Nelson]

I am resending the links. I checked all these links and they are all working for me. I could also email you the dsk file, or you can go to the main page at http://sourceforge.net/projects/nitros9/ and then navigate to the files/releases/v3.3.0/disks area. I checked the wiki link below as well, did that work or did you have issues with that as well? I am copying you directly on this message so that you will have a copy that did not go through the list server in case it is mangling the links some how.

This disk should boot from drivewire using the becker port with all the needed modules…
http://sourceforge.net/projects/nitros9/files/releases/v3.3.0/disks/nos96309l2v030300coco3_becker.dsk/download
or
http://sourceforge.net/projects/nitros9/files/releases/v3.3.0/disks/nos96809l2v030300coco3_becker.dsk/download

Since you are running VCC, make sure you are sunning version 1.43b with the becker port enabled.
This document covers that:
http://www.cocopedia.com/wiki/index.php/VCC_1.4.3b_and_DW4_Installation_Guide#Introducing_Vcc_1.4.3beta_with_Becker_Port_Support_for_DriveWire4

> Date: Sun, 20 Sep 2015 20:18:27 -0400
> From: "Plt at freemail2.com" <plt at freemail2.com>
> To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
> Subject: Re: [Coco] I am using the 6809
> Message-ID: <F8D1F63C-E52B-42FD-BE5B-58A56C9E811F at freemail2.com>
> Content-Type: text/plain;	charset=us-ascii
> 
> Bad links and I merge the files that you me to do.
> 
> 
> Phil Taylor
> 
>> On Sep 20, 2015, at 8:07 PM, Barry Nelson <barry.nelson at amobiledevice.com> wrote:
>> 
>> Did you try using the boot disk image in the links I sent?
>> Did you read the document about VCC 1.43b and set it up as described?
>> Are you booting from Drivewire?
>> Can you post the exact commands you are typing and the output?
>> 
>> -- 
>> Coco mailing list
>> Coco at maltedmedia.com
>> https://pairlist5.pair.net/mailman/listinfo/coco