[Coco] RGB2VGA

[Zippster]

All the potentiometers on the boards I’ve built or reworked (Kip’s) use the
same potentiometer, this covers about ~65 of the boards that will be out there.
I do know others have used a different style pot however, something to keep in mind.

The jumpers will have to be accessible too if the setup is to be used with other systems.

Board dimensions are the same on the original (OSH Park) boards and the SE boards
except for the mitered corners on the SE boards.

I’ll be sending John an assembled SE board as soon as I can get one assembled for him.

- Ed



> On Sep 17, 2015, at 9:03 AM, Brandon Tetreau <brandon.tetreau at gmail.com> wrote:
> 
> You would also want a hole to access the potentiometer, I got his CoCoSDC
> case and I've very impressed so I'd be interested as well.
> 
> On Thu, Sep 17, 2015 at 4:57 AM, Pere <psergm at gmail.com> wrote:
> 
>> Hi John,
>> I would like one, too
>> 
>> Just a question ...
>> What would go inside the case?
>> The RGB2VGA, the DE0-Nano ...
>> But the unit needs a power supply, so would you make a hole to be able
>> to run a USB cable?
>> Wouldn't anybody prefer the unit gets it from a trafo (5V 1A)?
>> 
>> 
>> thanks in advance
>> cheers
>> pere
>> 
>> 
>> 
>> Message: 7
>> Date: Wed, 16 Sep 2015 23:46:24 -0400
>> From: John Strong <johnstrong at hotmail.com>
>> To: "coco at maltedmedia.com" <coco at maltedmedia.com>
>> Subject: [Coco] RGB2VGA
>> Message-ID: <BLU174-W36EE7FF21531A5D6CB9836DF5A0 at phx.gbl>
>> Content-Type: text/plain; charset="iso-8859-1"
>> 
>> How many rgb2vga users would like a 3d printed case for it? I don't have
>> the boards yet, so I don't know how big (small?) or complicated the case
>> will be to design. So no price info at this time.
>> 
>> John Strong
>> 
>> 
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> https://pairlist5.pair.net/mailman/listinfo/coco
>> 
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco